Purchase
Bimini Aft-Curtain (Factory OEM)
part number [0yBB205 SE IN1-x0xxx-A44]
for 2005-2006 Sea-Doo®
Utopia 205 SE Bow Rider

Bimini-Aft-Curtain-OEM-G0.7™Factory Bimini AFT CURTAIN (slanted to Transom area, not vertical) with Eisenglass window(s) for Bimini-Top (not included), OEM (Original Equipment Manufacturer)
Sea Ray, 240 Sundancer, 2008, Bimini Top, Bimini Visor, Bimini Side Curtains, Bimini Aft Curtain, Rear.
Bimini-Aft-Curtain-OEM-G0.7™Factory Bimini AFT CURTAIN (slanted to Transom area, not vertical) with Eisenglass window(s) for Bimini-Top (not included), OEM (Original Equipment Manufacturer)
Sea Ray, 280 Sun Sport No Arch, 1998, Bimini Top, Front Visor, Side Curtains, Bimini Aft Curtain, Port Rear.
Images (random) of Bimini-Aft-Curtain-OEM-G0.7
(additional canvas pieces or covers may also be shown above, click images to enlarge)


American Boat Canvas™, Inc."s ProductsNot what you need? Try:

• Other Factory OEM canvas/covers for the 2005-2006 Sea-Doo Utopia 205 SE...
• Everything we have for Sea-Doo 205 boats... and we have Bimini-Aft-Curtain for these other boats...
Factory Bimini AFT CURTAIN (slanted to Transom area, not vertical) with Eisenglass window(s) for Bimini-Top (not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2005-2006 digitized patterns approved by Sea-Doo® for the Utopia 205 SE Bow Rider:
  • Notes: Sea-Doo logo
    • 2005-2006 Sea-Doo® Utopia 205 SE Model Specific Details: Sea-Doo made their own Bimini Top, so we do not have it. The Aft-Curtain slants back to the transom (with snaps). The Cockpit Cover goes to the Top of the windshield (not over). Sea-Doo® originally offered the 2005-2006 Utopia 205 SE in Charcoal Sunbrella® fabric.
    • Product Details: Zips onto OEM zippered Bimini-Top (Not included) and Side-Curtains (Not included). Curtain (typically angled to back of cockpit or transom) snaps to boat with included SS Snap-Stud-Screws. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes.
    • Sea-Doo® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on OEM Sea Doo® canvas are size #8 (6 teeth/inch). Sea Doo® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Doo® boats over 2 years old. Sea-Doo® OEM canvas part number scheme: tags p/n [yyBBmmm mm INr-xxxxx-Acc], where [yy] is the year, [BB] is Bombardier®, [mmm mm] is the model ([185UTOP] or [205UTOP] for example), [I] is Inboard, [N] is No-Arch, [r] is the revision, [xxxxx] identifies which canvas piece, [A] is Sunbrella® Acrylic fabric and [cc] is the color code. Sea Doo® Hull Identification Number (HIN) = YDVsssssmbyy , where [yy] = model year.
    • Factory OEM canvas: GLBT tags p/n [0yBB205 SE IN1 -x0xxx-A44], Sea Doo® p/n [204xxxxxx] or [29xxxxxxx]
    • TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
      1. White GLBT tags p/n [0yBB205 SE IN1 -x0xxx-A44], Sea Doo® p/n [204xxxxxx] or [29xxxxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
      2. The GLBT p/®  logo embossed on the heads of the stainless canvas snaps,
      3. The Zipper Size listed above (#8 in most cases) on all zippers.

  • Size/Fit:
    1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {2005,2006} Sea-Doo® Utopia 205 SE Bow Rider.
    2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [0yBB205 SE IN1 -x0xxx-A44], Sea Doo® p/n [204xxxxxx] or [29xxxxxxx] ("cc" is the color code).
    3. ONLY zips to Factory OEM Bimini-Top and Side-Curtains with GLBT tags.
    4. Factory OEM #8 Zippers Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
    5. The Bimini Aft-Curtain is NOT needed IF the boat has a Camper-Top and Camper-Aft-Curtain at the back.
    6. Stainless Steel Snaps included but NOT installed in canvas (to allow perfect alignment on install), need Snap Tool.
    7. Includes Zipper and Snap-Stud-Screws.
    8. Check the 2005-2006 Sea-Doo® Utopia 205 SE Model-Specific-Information abovefor any other size/fit notes and zipper size.
    9. Does NOT fit Sea-Doo® Utopia 205 SE prior to 2005.
    10. Does NOT fit Sea-Doo® Utopia 205 SE after 2006.
    11. Does NOT fit any year/make/model other than the 2005-2006 Sea-Doo® Utopia 205 SE.

  • Options:
  • 100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
    • Will fit your boat to the specs provided,
    • Will match your existing GLBT canvas,
    • Will perform as described when installed properly,
    • Will completely satisfy you with the quality and construction.
    You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.


  • Warranty: This product is covered by the Manufacturer's Warranty.

  • Installation:

  • Maintenance and Care: Canvas and Eisenglass Care and Maintenance

  • Reviews: American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
    ★★★★★


  • Lead-Time (Estimated): We no longer sell this product.

  • Your Boat: Sea-Doo Utopia 205 SE (2005-2006)
  • 12-digit HIN: (required)
    • Your 12-digit Hull-Identification-Number (HIN) (CECsssssmbyy) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
    • The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Bimini Aft-Curtain (Factory OEM),
    • Based on the model (Sea-Doo Utopia 205 SE) and HIN you provide, we will verify:
      • the exact, correct revision of the Bimini Aft-Curtain (Factory OEM) pattern to use,
      • the correct fabric and the color(s) originally offered from the factory by Sea-Doo® for the 2005-2006 Sea-Doo Utopia 205 SE,
    • Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.
  • Material/Colors:
    1. Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),Sunbrella® Logo
    2. Select Fabric/Color: any Standard color (Prem. colors are extra) Sunbrella® marine fabric. Sea-Doo® allows us to make OEM canvas in ANY color on our list below. To match your existing factory-orignial Sea-Doo® OEM canvas and covers, we recommend choosing one of these factory (OEM) colors originally offered by Sea-Doo® for the 2005-2006 Sea-Doo® Utopia 205 SE: Charcoal Sunbrella®, with 30ga Eisenglass clear vinyl window material
    • or Premium Color Upgrade for Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum Sunbrella® marine fabric.

  • Price: $625.88
    We are not selling this online as of 2024

        + Shipping to

    This product is not available for purchase at this time...

  • Shipping Notes:
    • Signature required for delivery,
    • Can NOT ship to Post Office (PO) Box,
    • Can NOT change your address after order is placed,
    • Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
    • Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
    • Check shipment for damage upon receipt and file claim with shipper.

  • International Shipments:
    • We do NOT ship Sea-Doo Bimini-Aft-Curtain-OEM-G0.7 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
    • Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
    • Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Made in USA Stripe Secure Checkout
Sales Agreement   |   Privacy Statement  
 © 2021-2024, partner
Virginia, USA
Email InfoG@RNR-Marine.com
COMPUTER claudebot 44.212.94.2 US












$625.88

We are not selling this online as of 2024

American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Scroll down to
select options and purchase...







Made in USA

© 2021-2024, American Boat Canvas™, Inc.


Page: http://rnr-marine.com/Purchase.php?product=Bimini-Aft-Curtain-OEM-G0.7&manufacturer=Sea-Doo&model=Utopia+205+SE&yearfrom=2005&yearto=2006&partno=0yBB205%20SE%20IN1%20-x0xxx-A44