Factory Bimini AFT DROP CURTAIN with Eisenglass window(s) zips to back of OEM Bimini-Top (not included) to Floor (Vertical, Not slanted to transom), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2008-2009 digitized patterns approved by Mako® for the 215 Express Express Cuddy:
Notes: Zips onto back of OEM zippered Bimini-Top (Not included) and Bimini-Side-Curtains, and typically DROPS vertically from back edge of Bimini to the Floor. Curtain snaps to boat with Stainless steel Canvas-Snaps (which are included but not installed in the canvas) or Bunjis in some cases. Let us know if you need SS Snap-Stud-Screws to screw into the boat. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes.
Factory OEM canvas: GLBT tags p/n [0yMG215 WA SNr -x0xxx-Acc]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White GLBT tags p/n [0yMG215 WA SNr -x0xxx-Acc] (the tags are approx. 2-3 inches x 4-5 inches),
The GLBT p/® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2008,2009} Mako® 215 Express Express Cuddy.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [0yMG215 WA SNr -x0xxx-Acc] ("cc" is the color code).
ONLY zips to Factory OEM Bimini-Top and Side-Curtains with GLBT tags.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
The Bimini Aft-Curtain is NOT needed IF the boat has a Camper-Top and Camper-Aft-Curtain at the back.
Stainless Steel Snaps included but NOT installed in canvas (to allow perfect alignment on install), need Snap Tool.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Not what you need? Try:
