Purchase
Bimini Connector (Factory OEM)
part number [11xxxxccc - TB 350 BR]
for 2013-current Formula® 350 CBR Arch
350 CBR and 350FX CBR Crossover Bowrider (twin I/O sterndrives or twin/triple O/B outboards) with factory installed, forward slanting Fiberglass Radar Arch and Ameritex(r) ATS Advanced Track System on front and back

Formula® 350 CBR Arch Bimini-Connector-OEM-T7™ Factory Front BIMINI CONNECTOR Eisenglass Window Set (also called Windscreen, typically 3 front panels, but 1 or 2 on some boats) zips between Bimini-Top (not included) and Windshield. (NO Bimini-Top OR Side-Curtains, sold separately), OEM (Original Equipment Manufacturer)
Formula, 350 CBR Arch, 2014, Bimini Top, Front Connector, Side Curtains, Aft Curtain, Port Front.
Formula® 350 CBR Arch shown with Bimini-Connector-OEM-T7
(additional canvas pieces or covers may also be shown above, click images to enlarge)


RNR-Marine, Inc. ProductsNot what you need? Try:

• Other Factory OEM canvas/covers for the 2013-2024 Formula 350 CBR Arch...
• Everything we have for Formula 350 boats... and we have Bimini-Connector for these other boats...
Factory Front BIMINI CONNECTOR Eisenglass Window Set (also called Windscreen, typically 3 front panels, but 1 or 2 on some boats) zips between Bimini-Top (not included) and Windshield. (NO Bimini-Top OR Side-Curtains, sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2013-2024 digitized patterns approved by Formula® for the 350 CBR Arch: 350 CBR and 350FX CBR Crossover Bowrider (twin I/O sterndrives or twin/triple O/B outboards) with factory installed, forward slanting Fiberglass Radar Arch and Ameritex(r) ATS Advanced Track System on front and back:
  • Notes:
    • 2013-current Formula® 350 CBR Arch Model Specific Details: Zippers are size #8 (6 teeth/inch), not #10 (5 teeth/inch). Stainless Steel top frame (bows). The Visor and Bimini Side Curtains snap to top of the windshield frame. The Bimini, Side Curtains and aft Camper Top attach to the Arch using the Ameritex® ATS Advanced Track System using Ameritex® part #15045, VINYL-RADAR ARCH INSERT BLK, ATS Track Insert (Email us if you need this). The Camper Aft Curtain has an upside-down, U-shaped zippered window with screen. We cannot sell OEM canvas or covers direct for boats less than 2 years old - contact your Formula® dealer. Formula® originally offered the 2013-current 350 CBR Arch in Black, Captain Navy, Marine Blue (no longer available in SeaMark, replaced by similar Mediterranean Blue Tweed SeaMark) , Pacific Blue, Cadet Grey, Toast Tweed or Burgundy Sunbrella® with SeaMark vinyl lined, waterproof Sunbrella® tops and White Mustang® Arch Connections and Boots OR Contact us for All White Mustang® fabric.
    • Product Details: Zips to front of Bimini-Top (Not included) and either snaps onto or slides into a track at the top of the windshield. The side typically zip to a pair of Bimini-Side-Curtains (Not included). Stainless steel Canvas-Snaps are included (IF used) but not installed in the canvas. Let us know if you need Clip-On-Windshield-Frame-Snaps or slides into a track at the top of the windshield.
    • Formula® Factory Original Equipment Manufacturer (OEM) Notes: TAGSA laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® or Taylor Made® original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size:
      • #8 (6 teeth/inch) used up to early 2005 and from 2009 forward,
      • #10 (5 teeth/inch) used on most (not all) boats from the end of 2005 through the 2008 model year (it is necessary to check your zipper size when ordering 2005-1008 canvas: simply measure the number of teeth over 2 inches and divide by 2 for accuracy)
      . Boot Covers MAY have the Formula® logo embroidered in Silver, Gold, Black or White (Formula specified depending on fabric color). All Formula® frame bows and hardware are Type 316L Stainless Steel. All Formula® Tops are sewn with Gore(®) Tenara(®) Thread to avoid rotting. Most (NOT All) Formula® Tops have zippered frame (bow) pockets for easy installation. Formula® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Formula® made their factory OEM Bow, Cockpit and Mooring Covers in-house themselves, so we do NOT have them. We can only sell canvas and covers direct for Formula® boats over 2 years old. OEM canvas part number scheme: [xxxxx] identifies the canvas piece and [ccc] is the color code. Formula® Hull Identication Number (HIN) scheme is TNRsssssmbyy, where [yy] is the model year.
    • Factory OEM canvas: Ameritex® tags p/n [11xxxxccc - S-TB 350 BR xxxxx]
    • TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
      1. White Ameritex® tags p/n [11xxxxccc - S-TB 350 BR xxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
      2. The Ameritex®  logo embossed on the heads of the stainless canvas snaps,
      3. The Zipper Size listed above (#8 in most cases) on all zippers.

  • Size/Fit:
    1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {2013,2014,2015,2016,2017,2018,2019,2020,2021,2022,2023,2024} Formula® 350 CBR Arch: 350 CBR and 350FX CBR Crossover Bowrider (twin I/O sterndrives or twin/triple O/B outboards) with factory installed, forward slanting Fiberglass Radar Arch and Ameritex(r) ATS Advanced Track System on front and back.
    2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [11xxxxccc - S-TB 350 BR xxxxx] ("ccc" is the color code).
    3. ONLY zips to Factory OEM Bimini-Top and Side-Curtains.
    4. Verify AMERITEX or TAYLOR-MADE tags.
    5. Factory OEM #8 Zippers Ameritex Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
    6. Will NOT fit after-market top or canvas.
    7. Zips to front of OEM Bimini-Top.
    8. Attaches to OEM windshield with Clip-On-Windshield-Frame-Snaps, Stainless steel Snap-Stud-Screws or Keder Welt that slides into a track on the top of the windshield.
    9. Stainless steel Canvas-Snaps are included (If used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool may be required.
    10. Check the 2013-2024 Formula® 350 CBR Arch Model-Specific-Information abovefor any other size/fit notes and zipper size.
    11. Does NOT fit Formula® 350 CBR Arch prior to 2013.
    12. Does NOT fit any year/make/model other than the 2013-2024 Formula® 350 CBR Arch.

  • Options:
  • Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
    • Will be of first rate quality and free of manufacturing defects,
    • Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
    • Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
    • Will perform as described when installed properly.
    You can count on all of the above or we will repair or replace the item in question.


  • Warranty: This product is covered by the Ameritex® 1 Year Manufacturer Warranty.

  • Maintenance and Care: Canvas and Eisenglass Care and Maintenance

  • Reviews: BBB® logoRNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews
    ★★★★✬



    Oops! A search directed you to Bimini-Connector-OEM-T7 for a Formula 350 CBR Arch (2013-current), which doesn't match exactly what we have in our database.

    No problem, we probably have it (the search engine may not have found it yet) ...
    • Select from the boats we have the Bimini-Connector-OEM-T for2:
      , or

    • Search for canvas for
      To find factory OEM & custom fit canvas, tops, covers & carpet, enter:
      Manufacturer:
      Boat Model
      :
      , or

Made in USA Stripe Secure Checkout
Sales Agreement   |   Privacy Statement  
© 2003-2024, RNR-Marine, Inc.
636G Long Point Road
Mount Pleasant, SC 29464, USA
Email Sales@RNR-Marine.com
COMPUTER claudebot 44.192.247.185 US











BBB® logoRNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews
★★★★✬

Scroll down to
select options and purchase...







Made in USA

© 2003-2024, RNR-Marine™, Inc.


Page: http://rnr-marine.com/Purchase.php?product=Bimini-Connector-OEM-T7&manufacturer=Formula&model=350+CBR+Arch&yearfrom=2013&yearto=current&partno=11xxxxccc%20-%20TB%20350%20BR