Factory Camper AFT CURTAIN with clear Eisenglass windows zips to back of OEM Camper Top and Side Curtains (not included) and connects to Transom, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2011-2024 digitized patterns approved by Four Winns® for the V355:
SQL ERROR 4855: NO match for [fourwinns|v355||2011|current|] in Boats Table [DB/Boats2.psv]. ... Redirecting to FourWinns.shtml#355 in 5 seconds...
Notes:
2011-current Four Winns® V355 Model Specific Details:
Product Details: Camper Top is an enclosure attached to the back of a Bimini, Sunshade, Convertible Top or Arch that has its own frame to cover to the back of the boat. Includes mounting hardware and Stainless Steel Snaps. When combined with Side-Curtains, the Camper-Top-Aft-Curtains fully enclose the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. Snaps NOT installed in canvas, Snap Tool required. The Aft-Curtain has 25 to 60 standard 3/8" snaps or bungee cords, depending on the boat. Factory Original-Equipment (OEM) canvas made-to-order. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes. Also called: Boston Whaler "Sun-Top" or Grady White "Vista Top".
Four Winns® Factory Original Equipment Manufacturer (OEM) Notes:
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White (the tags are approx. 2-3 inches x 4-5 inches),
The ® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021,2022,2023,2024} Four Winns® V355.
ONLY zips to Factory OEM Camper Top and Side Curtains (no tincluded).
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Will NOT fit after-market top canvas.
Stainless Steel Snaps included but NOT installed in canvas (to allow perfect alignment on install), need Snap Tool.
Includes Mounting Track or Zipper and Snap-Stud-Screws.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.