Purchase
Cockpit Cover Bimini Cutouts (Factory OEM)
part number [98RE1700 CAINr-x0xxx-Acc]
for 1998-1998 Regal®
1700 LSR bowrider, No Wakeboard Tower or Radar Arch, I/O sterndrive

Cockpit-Cover-Bimini-Cutouts-OEM-G0™Factory Snap-On COCKPIT COVER with Cutouts (openings) for Bimini-Top (the Bimini-Top stands above the windshield) Frame (only), Adjustable Support Pole(s) and reinforced Snap(s) or Grommet(s) inside Cover for Tip of Pole(s), OEM (Original Equipment Manufacturer)

Boat Canvas Identification, Bow Cover, Cockpit Cover.

Great Lakes Bow and Cockpit Cover, Adjustable Support Pole, Snaps.

Images (random) of Cockpit-Cover-Bimini-Cutouts-OEM-G0
(additional canvas pieces or covers may also be shown above, click images to enlarge)

Not what you need? Try:

• Other Factory OEM canvas/covers for the 1998-1998 Regal 1700...
• Everything we have for Regal 1700 boats... and we have Cockpit-Cover-Bimini-Cutouts for these other boats...

Factory Snap-On COCKPIT COVER with Cutouts (openings) for Bimini-Top (the Bimini-Top stands above the windshield) Frame (only), Adjustable Support Pole(s) and reinforced Snap(s) or Grommet(s) inside Cover for Tip of Pole(s), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 1998-1998 digitized patterns approved by Regal® for the 1700 LSR bowrider, No Wakeboard Tower or Radar Arch, I/O sterndrive:

Notes: Snaps tightly over the Cockpit area and has Velcro-Lined Cutouts to go around the Bimini-Top frame (not included). Comes with one or two (depending on size) Adjustable Aluminum Support Pole(s) with Snap or Grommet through reinforced area in center of Cockpit-Cover. Cockpit-Cover has 30 to 80 standard 3/8" snaps, depending on the boat. Includes Male Snap-Stud-Screws. Factory Original-Equipment (OEM) cover made-to-order.
- Factory OEM canvas: GLBT tags p/n [98RE1700 CAINr -x0xxx-Acc], Regal® p/n [170xxxx]
- Other Factory OEM canvas, frames and covers for the 1998-1998 Regal 1700 are sold separately here.
Size/Fit:
1. Factory Original-Equipment-Manufacturer (OEM) patterned for the 1998 Regal® 1700 LSR bowrider, No Wakeboard Tower or Radar Arch, I/O sterndrive.
2. Does NOT fit around raised Convertible-Top (Convertible-Top connects to the top of the windshield) or Camper-Top (at rear) Frame.
3. Only fits Factory-Original Windshield, Arch/Tower (if so equipped) and Bimini-Top Frame (the Bimini-Top stands above the windshield) setups.
4. Snaps included but NOT installed in canvas, so a Snap Installation Tool is required.
5. Cut-outs for Bimini-Top-Frame are made per Factory-Original specification.
6. Sea Ray® is the ONLY boat mfgr that offers a choice in Cockpit-Cover Cutouts.
7. Ships in a 42inch x 25inch x 7inch Box weighing approximately 38pounds.
8. Check the 1998-1998 Regal® 1700 Model-Specific-Information abovefor any other size/fit notes and zipper size.
9. Does NOT fit Regal® 1700 prior to 1998.
10. Does NOT fit Regal® 1700 after 1998.
11. Does NOT fit any year/make/model other than the 1998-1998 Regal® 1700.
Options:
- Sold separately: other Factory Original-Equipment-Manufacturer (OEM) Canvas, Frames and Covers offered by Regal® from 1998 to 1998 for the Regal 1700
- Drill NO HOLES in your boat with SNAD™ Adhesive Snaps,
- Canvas Snap Installation Tool,
- Time Saver™ Snap Installation Vice-Grip Attachment (T4-79B Button Anvil and T4-82A Button Clincher) jaw insert set, available online at Freeport, Defender or locally at West Marine,
- Sunbrella Premium Color Upgrade: Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
- Will fit your boat to the specs provided,
- Will match your existing GLBT canvas,
- Will perform as described when installed properly,
- Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Installation:
- Cockpit Cover Installation,
- Installing Male Snap Stud Screws in Fiberglass
Maintenance and Care: Canvas Care and Maintenance
Reviews: American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Lead-Time (Estimated): We no longer sell this product.

Your Boat: Regal 1700 (1998-1998)

12-digit HIN: (required)

Your 12-digit Hull-Identification-Number (HIN) (RGMsssssmbyy) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Cockpit Cover Bimini Cutouts (Factory OEM),
Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.

Material/Colors:

Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),
Select Fabric/Color: any Standard color (Prem. colors are extra) Sunbrella® marine fabric. Regal® allows us to make OEM canvas in ANY color on our list below. To match your existing factory-orignial Regal® OEM canvas and covers, we recommend choosing one of these factory (OEM) colors originally offered by Regal® for the 1998-1998 Regal® 1700: Black, Forest Green, Taupe or Burgundy Sunbrella®,

or Premium Color Upgrade for Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum Sunbrella® marine fabric.

Price: $1,000.96

We are not selling this online as of 2024

+ Shipping to

This product is not available for purchase at this time...

Please Email SeaRay@RNR-Marine.com
to be notified when Cockpit-Cover-Bimini-Cutouts-OEM-G0
is available for your Regal 1700 (1998-1998).

Shipping Notes:
- Signature required for delivery,
- Can NOT ship to Post Office (PO) Box,
- Can NOT change your address after order is placed,
- Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
- Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
- Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
- We do NOT ship Regal Cockpit-Cover-Bimini-Cutouts-OEM-G0 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
- Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
- Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.

COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 3.145.163.58 US

$1,000.96

We are not selling this online as of 2024

American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®

★★★★★

Scroll down to
select options and purchase...

Page: http://rnr-marine.com/Purchase.php?product=Cockpit-Cover-Bimini-Cutouts-OEM-G0&manufacturer=Regal&model=1700&yearfrom=1998&yearto=1998&partno=98RE1700%20CAINr%20-x0xxx-Acc

Purchase Cockpit Cover Bimini Cutouts (Factory OEM) part number [98RE1700 CAINr-x0xxx-Acc] for 1998-1998 Regal® 1700 LSR bowrider, No Wakeboard Tower or Radar Arch, I/O sterndrive

Purchase
Cockpit Cover Bimini Cutouts (Factory OEM)
part number [98RE1700 CAINr-x0xxx-Acc]
for 1998-1998 Regal®
1700 LSR bowrider, No Wakeboard Tower or Radar Arch, I/O sterndrive