Purchase Hard Top Connector (Factory OEM) part number [11xxxxccc - TB 350] for 2013-current Formula® 350 CBR Fiberglass Arch Hard-Top 350 CBR and 350FX CBR Crossover Bowrider (twin sterndrives or triple outboards) with factory installed Hard-Top with forward facing Fiberglass (Not Metal) Arch Frame
Rinker, 330, 2008, Factory OEM, Hard Top Connector, Side Curtain, Camper Top, Starboard Front.
Boat Canvas Identification, Ameritex.
Images (random) of Hard-Top-Connector-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Hard-Top CONNECTOR front Eisenglass Window Set (also called Windscreen: 1 or 2 front panels) for Factory Hard-Top, typically with zippers on side for Hard Top Side Curtains (not included) OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2013-2024 digitized patterns approved by Formula® for the 350 CBR Fiberglass Arch Hard-Top: 350 CBR and 350FX CBR Crossover Bowrider (twin sterndrives or triple outboards) with factory installed Hard-Top with forward facing Fiberglass (Not Metal) Arch Frame:
Notes:
2013-current Formula® 350 CBR Fiberglass Arch Hard-Top Model Specific Details: Be sure your boat has the FIBERGLASS Arch Sides up to the Hard-Top (it was also offered with a Metal Tower Frame). Zippers are size #8 (6 teeth/inch), not #10 (5 teeth/inch). All canvas connects to the Hard-Top with (3) separate White Connections (zipper strips) which slide into tracks on the hard-top. There is a pair of Aft-Side-Curtains and a separate Aft-Curtain (with zippered window) behind the Hard-Top. The Aft-Curtain zips open for access through the transom door. The Connector and Side Curtains snap to top of windshield frame. The front Connector is rigid, 60mil Polycarbonate. The front Side-Curtains are 40mil clear vinyl. The Aft-Side and Aft Curtains are 30mil clear vinyl. We cannot sell OEM canvas or covers direct for boats less than 2 years old - contact your Formula® dealer. Formula® referred to this boat internally as a [351 DP]. Formula® originally offered the 2013-current 350 CBR Fiberglass Arch Hard-Top in Black, Marine Blue, Captain Navy, Cadet Grey, Toast Tweed or Linen Sunbrella® with White Arch Connections fabric.
Product Details: Flexible Glass fits between Hard-Top and Windshield or Console (typically with Zip-Open Windows) Also called "Windshield", "Spray-Shield" or "Visor". Mounts under Front of Hard-Top with Plastic or Aluminum Tracks and SS Snap-Stud-Screws, Clip-On-Windshield-Frame-Snaps or slides into a track at the top of the windshield.
Formula® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size:
#8 (6 teeth/inch) used up to early 2005 and from 2009 forward,
#10 (5 teeth/inch) used on most (not all) boats from the end of 2005 through the 2008 model year
(it is necessary to check your zipper size when ordering 2005-1008 canvas: simply measure the number of teeth over 2 inches and divide by 2 for accuracy)
. Boot Covers MAY have the Formula® logo embroidered in Silver, Gold, Black or White (Formula specified depending on fabric color). All Formula® frame bows and hardware are Type 316L Stainless Steel. All Formula® Tops are sewn with Gore(®) Tenara(®) Thread to avoid rotting. Most (NOT All) Formula® Tops have zippered frame (bow) pockets for easy installation. Formula® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Formula® made their factory OEM Bow, Cockpit and Mooring Covers in-house themselves, so we do NOT have them. We can only sell canvas and covers direct for Formula® boats over 2 years old. OEM canvas part number scheme: [xxxxx] identifies the canvas piece and [ccc] is the color code. Formula® Hull Identication Number (HIN) scheme is TNRsssssmbyy, where [yy] is the model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2013,2014,2015,2016,2017,2018,2019,2020,2021,2022,2023,2024} Formula® 350 CBR Fiberglass Arch Hard-Top: 350 CBR and 350FX CBR Crossover Bowrider (twin sterndrives or triple outboards) with factory installed Hard-Top with forward facing Fiberglass (Not Metal) Arch Frame.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [102xxxccc - TB 350 HT] ("ccc" is the color code).
Fits Factory installed Original-Equipment (OEM) Hard-Top and OEM Side-Curtains perfectly.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Will NOT fit after-market top or canvas.
Mounts to front of Hard-Top via Hard-Top-Connection (Zipper Strip) or directly with Keder Welt which slides into Plastic or Aluminum Tracks.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
The Hard-Top-Connector-OEM-T is not priced for a {2013,2014,2015,2016,2017,2018,2019,2020,2021,2022,2023,2024} Formula 350 CBR Fiberglass Arch Hard-Top ...
Let us check and see if it has a different price (Hard-Top-Connector-OEM-Tx) than the link from the web has...
We are sorry, but Hard-Top-Connector-OEM-T is Not Listed for this boat (yet)...
Not what you need? Try:
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size: 
