Purchase
Bimini Boot Logo (Factory OEM)
part number [0ySR220 SELSNr-xxxxx-fcc]
for 2006-2007 Sea Ray® 220 Select No Tower
220 Select bowrider, NO Tower, Sterndrive I/O

Sea Ray, 220 Select No Tower, 2006, Bimini Top in Boot, Bow Cover, Cockpit Cover, Port Rear.

Sea Ray® 220 Select No Tower shown with Bimini-Boot-Logo-OEM-G2
(additional canvas pieces or covers may also be shown above, click images to enlarge)

Not what you need? Try:

• Other Factory OEM canvas/covers for the 2006-2007 Sea Ray 220 Select No Tower...
• Everything we have for Sea Ray 220 boats... and we have Bimini-Boot-Logo for these other boats...

Factory Zippered Bimini BOOT COVER with Embroidered Boat Manufacturer Logo, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2006-2007 digitized patterns approved by Sea Ray® for the 220 Select No Tower: 220 Select bowrider, NO Tower, Sterndrive I/O:

Notes:
- 2006-2007 Sea Ray® 220 Select No Tower Model Specific Details: This boat was offered with Sunpad with a choice of (2) bench seats in front of it: FULL-WIDTH Bench Seat in front of the Sunpad OR 3/4-WIDTH Bench Seat with individual seat on Port side beside Sunpad. The Cockpit Cover goes OVER the windshield and snaps at the base of the windshield in front. Sea Ray® originally offered the 2006-2007 220 Select No Tower in Black, Mediterranean Blue Tweed, Captain Navy and Jockey Red Sunbrella® (the Bimini Top was originally SeaMark® vinyl-lined Sunbrella®, but is now Sunbrella® to avoid mold issues) fabric.
- Product Details: Boot cover to cover and protect Bimini-Top (Not included) when folded and not in use. Boot has the boat manufacturers logo embroidered on it in contrasting thread color specified by boat manufacturer. The Sea Ray® logos is embroidered in Tan (looks Gold) up to 2011, then Silver from 2012 forward. Factory Original-Equipment (OEM) cover made-to-order.
- Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
- Factory OEM canvas: GLBT tags p/n [0ySR220 SELSNr -xxxxx-fcc], Sea Ray® p/n [1xxxxxx]
- TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
  1. White GLBT tags p/n [0ySR220 SELSNr -xxxxx-fcc], Sea Ray® p/n [1xxxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
  2. The GLBT p/® logo embossed on the heads of the stainless canvas snaps,
  3. The Zipper Size listed above (#8 in most cases) on all zippers.
- Other Factory OEM canvas, frames and covers for the 2006-2007 Sea Ray 220 Select No Tower are sold separately here.
Size/Fit:
1. Factory Original-Equipment-Manufacturer (OEM) patterned for the {2006,2007} Sea Ray® 220 Select No Tower: 220 Select bowrider, NO Tower, Sterndrive I/O.
2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [0ySR220 SELSNr -xxxxx-fcc], Sea Ray® p/n [1xxxxxx] ("cc" is the color code).
3. Only fits Factory Original-Equipment Bimini-Top Frame and Canvas with GLBT tags on existing Bimini Top).
4. Check the 2006-2007 Sea Ray® 220 Select No Tower Model-Specific-Information abovefor any other size/fit notes and zipper size.
5. Does NOT fit Sea Ray® 220 Select No Tower prior to 2006.
6. Does NOT fit Sea Ray® 220 Select No Tower after 2007.
7. Does NOT fit any year/make/model other than the 2006-2007 Sea Ray® 220 Select No Tower.
Options:
- Sold separately: other Factory Original-Equipment-Manufacturer (OEM) Canvas, Frames and Covers offered by Sea Ray® from 2006 to 2007 for the Sea Ray 220 Select No Tower
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
- Will fit your boat to the specs provided,
- Will match your existing GLBT canvas,
- Will perform as described when installed properly,
- Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Installation: Canvas and Snap Installation Instructions
Maintenance and Care: Canvas Care and Maintenance
Reviews: American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Lead-Time (Estimated): We no longer sell this product.

Your Boat: Sea Ray 220 Select No Tower (2006-2007)

12-digit HIN: (required)

Your 12-digit Hull-Identification-Number (HIN) (SERxssssmyxx) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Bimini Boot Logo (Factory OEM),
Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.

IMPORTANT information required about your 2006-2007 Sea Ray 220 Select No Tower:
Aft Seat ? (required)

Material/Colors:

Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),
Select Fabric/Color: any color Sunbrella® marine fabric. Sea Ray® allows us to make OEM canvas in ANY color on our list below. To match your existing factory-orignial Sea Ray® OEM canvas and covers, we recommend choosing one of these factory (OEM) colors originally offered by Sea Ray® for the 2006-2007 Sea Ray® 220 Select No Tower: Black, Mediterranean Blue Tweed, Captain Navy and Jockey Red Sunbrella® (the Bimini Top was originally SeaMark® vinyl-lined Sunbrella®, but is now Sunbrella® to avoid mold issues),

Select: EMBROIDERY COLOR: (required)

Price: $180.05

We are not selling this online as of 2024

+ Shipping to

This product is not available for purchase at this time...

Please Email SeaRay@RNR-Marine.com
to be notified when Bimini-Boot-Logo-OEM-G2
is available for your Sea Ray 220 Select No Tower (2006-2007).

Shipping Notes:
- Signature required for delivery on orders over $500,
- Can NOT ship to Post Office (PO) Box,
- Can NOT change your address after order is placed,
- Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
- Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
- Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
- We do NOT ship Sea Ray Bimini-Boot-Logo-OEM-G2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
- Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
- Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.

COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 18.219.22.169 US

$180.05

We are not selling this online as of 2024

American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®

★★★★★

Scroll down to
select options and purchase...

Page: http://rnr-marine.com/Purchase.php?product=Bimini-Boot-Logo-OEM-G2&manufacturer=Sea+Ray&model=220+Select+No+Tower&yearfrom=2006&yearto=2007&partno=0ySR220%20SELSNr%20-xxxxx-fcc

Purchase Bimini Boot Logo (Factory OEM) part number [0ySR220 SELSNr-xxxxx-fcc] for 2006-2007 Sea Ray® 220 Select No Tower 220 Select bowrider, NO Tower, Sterndrive I/O

Purchase
Bimini Boot Logo (Factory OEM)
part number [0ySR220 SELSNr-xxxxx-fcc]
for 2006-2007 Sea Ray® 220 Select No Tower
220 Select bowrider, NO Tower, Sterndrive I/O