Purchase
Bimini Visor (Factory OEM)
part number [03SR340 SDAtA1-x0xxx-fcc]
for 2003-2003 Sea Ray® 340 Sundancer SDA
340SDA (NOT the 340DA) Sundancer (375 International) with factory installed, forward facing Radar Arch (Spoiler)

Sea Ray® 340 Sundancer SDA Bimini-Visor-OEM-G3™ Factory Front VISOR Eisenglass Window Set (typ. 3 front panels, but 1 or 2 on some boats) zips between front of OEM Bimini-Top (not included) and Windshield (NO Side-Curtains, sold separately), OEM (Original Equipment Manufacturer)

Sea Ray, 340 Sundancer SDA, 2003, Bimini Top, Front Visor, Side Curtains, Sunshade Top, Port Front.

Sea Ray® 340 Sundancer SDA shown with Bimini-Visor-OEM-G3
(additional canvas pieces or covers may also be shown above, click images to enlarge)

Not what you need? Try:

• Other Factory OEM canvas/covers for the 2003-2003 Sea Ray 340 Sundancer SDA...
• Everything we have for Sea Ray 340 boats... and we have Bimini-Visor for these other boats...

Factory Front VISOR Eisenglass Window Set (typ. 3 front panels, but 1 or 2 on some boats) zips between front of OEM Bimini-Top (not included) and Windshield (NO Side-Curtains, sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2003-2003 digitized patterns approved by Sea Ray® for the 340 Sundancer SDA: 340SDA (NOT the 340DA) Sundancer (375 International) with factory installed, forward facing Radar Arch (Spoiler):

Notes:
- 2003-2003 Sea Ray® 340 Sundancer SDA Model Specific Details: The Visor and Side Curtains connect to the top of the windshield with a rubber strip that slides in a track, not snaps. The Cockpit Cover goes OVER the windshield and snaps at the base of the windshield in front. No Aft stand-up Camper Top or Camper Curtains were offered by Sea Ray®. Sea Ray® originally offered the 2003-2003 340 Sundancer SDA in Black, Mediterranean Blue Tweed, Hunter Green Tweed and Toast Tweed Sunbrella® (the Tops and Valances were originally SeaMark® vinyl-lined Sunbrella®, but are now Sunbrella® to avoid mold issues) fabric.
- Product Details: The Visor is the entire clear Eisenglass (clear vinyl) window or window set (typically 3 individual sections, but 1 or 2 on some boats) that zip together above the windshield (typically the center section zips open). The Visor either snaps onto or slides into a track at the top of the windshield (this will be exactly as per original, either snaps or rubber slide). The Visor has Zippers on the top for the Bimini-Top (Not included) and each side (Port and Starboard) for the Bimini-Side-Curtains (Not included, if so equipped) to form the front part of a complete eisenglass enclosure. Often part of "Weather Enclosure". Factory Original-Equipment (OEM) canvas made-to-order.
- Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
- Factory OEM canvas: GLBT tags p/n [03SR340 SDAtA1 -x0xxx-fcc], Sea Ray® p/n [169xxxx] or [173xxxx]
- TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
  1. White GLBT tags p/n [03SR340 SDAtA1 -x0xxx-fcc], Sea Ray® p/n [169xxxx] or [173xxxx] (the tags are approx. 2-3 inches x 4-5 inches),
  2. The GLBT p/® logo embossed on the heads of the stainless canvas snaps,
  3. The Zipper Size listed above (#8 in most cases) on all zippers.
- Other Factory OEM canvas, frames and covers for the 2003-2003 Sea Ray 340 Sundancer SDA are sold separately here.
Size/Fit:
1. Factory Original-Equipment-Manufacturer (OEM) patterned for the 2003 Sea Ray® 340 Sundancer SDA: 340SDA (NOT the 340DA) Sundancer (375 International) with factory installed, forward facing Radar Arch (Spoiler).
2. Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [03SR340 SDAtA1 -x0xxx-fcc], Sea Ray® p/n [169xxxx] or [173xxxx] ("cc" is the color code).
3. ONLY zips to Factory OEM Bimini-Top Frame, Visor and Side-Curtains (NOT included).
4. Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
5. Will NOT fit after-market top or canvas.
6. Zips to front of OEM Bimini-Top.
7. Attaches to OEM windshield with Clip-On-Windshield-Frame-Snaps, Stainless steel Snap-Stud-Screws or Keder Welt that slides into a track on the top of the windshield.
8. Snaps are included, but NOT installed in the canvas (to allow perfect alignment on install), so you will need a Snap Installation Tool for snaps (includes male snap-screw-studs OR windshield clip-on snaps if needed).
9. Check the 2003-2003 Sea Ray® 340 Sundancer SDA Model-Specific-Information abovefor any other size/fit notes and zipper size.
10. Does NOT fit Sea Ray® 340 Sundancer SDA prior to 2003.
11. Does NOT fit Sea Ray® 340 Sundancer SDA after 2003.
12. Does NOT fit any year/make/model other than the 2003-2003 Sea Ray® 340 Sundancer SDA.
Options:
- Sold separately: other Factory Original-Equipment-Manufacturer (OEM) Canvas, Frames and Covers offered by Sea Ray® from 2003 to 2003 for the Sea Ray 340 Sundancer SDA
- Canvas Snap Installation Tool,
- Time Saver™ Snap Installation Vice-Grip Attachment (T4-79B Button Anvil and T4-82A Button Clincher) jaw insert set, available online at Freeport, Defender or locally at West Marine.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
- Will fit your boat to the specs provided,
- Will match your existing GLBT canvas,
- Will perform as described when installed properly,
- Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Installation: Canvas and Snap Installation Instructions
Maintenance and Care: Canvas and Eisenglass Care and Maintenance
Reviews: American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Lead-Time (Estimated): We no longer sell this product.

Your Boat: Sea Ray 340 Sundancer SDA (2003-2003)

12-digit HIN: (required)

Your 12-digit Hull-Identification-Number (HIN) (SERxssssmyxx) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Bimini Visor (Factory OEM),
Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.

IMPORTANT information required about your 2003-2003 Sea Ray 340 Sundancer SDA:
Sea Ray introduced the new 340SDA in mid 2003, replacing the 340DA, with several obvious differences:. The Sea Ray Hull Production Number embossed below the 12-digit HIN on the starboard side of the transom says either 340DAxxx or 340SDAxxx. The 2003 340DA had an 11-1/2' beam, while the newer 340SDA had a 12' beam. The 2003 340SDA has 2 ROUND Deck Hatches in front of the Windscreen, while the 2003 340DA has all SQUARE Deck Hatches. The 2003 340SDA Sink is at the base of the Port Radar Arch, while the 2003 340DA Sink is to the Port of the Helm. Specify Windshield Frame Material? ? (required)

Material/Colors:

Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),
Select Fabric/Color: any color Sunbrella® marine fabric. Sea Ray® allows us to make OEM canvas in ANY color on our list below. To match your existing factory-orignial Sea Ray® OEM canvas and covers, we recommend choosing one of these factory (OEM) colors originally offered by Sea Ray® for the 2003-2003 Sea Ray® 340 Sundancer SDA: Black, Mediterranean Blue Tweed, Hunter Green Tweed and Toast Tweed Sunbrella® (the Tops and Valances were originally SeaMark® vinyl-lined Sunbrella®, but are now Sunbrella® to avoid mold issues), with 30ga Eisenglass clear vinyl window material

Price: $837.87

We are not selling this online as of 2024

+ Shipping to

This product is not available for purchase at this time...

Please Email SeaRay@RNR-Marine.com
to be notified when Bimini-Visor-OEM-G3
is available for your Sea Ray 340 Sundancer SDA (2003-2003).

Shipping Notes:
- Signature required for delivery,
- Can NOT ship to Post Office (PO) Box,
- Can NOT change your address after order is placed,
- Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
- Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
- Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
- We do NOT ship Sea Ray Bimini-Visor-OEM-G3 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
- Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
- Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.

COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 18.223.172.252 US

$837.87

We are not selling this online as of 2024

American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®

★★★★★

Scroll down to
select options and purchase...

Page: http://rnr-marine.com/Purchase.php?product=Bimini-Visor-OEM-G3&manufacturer=Sea+Ray&model=340+Sundancer+SDA&yearfrom=2003&yearto=2003&partno=03SR340%20SDAtA1%20-x0xxx-fcc

Purchase Bimini Visor (Factory OEM) part number [03SR340 SDAtA1-x0xxx-fcc] for 2003-2003 Sea Ray® 340 Sundancer SDA 340SDA (NOT the 340DA) Sundancer (375 International) with factory installed, forward facing Radar Arch (Spoiler)

Purchase
Bimini Visor (Factory OEM)
part number [03SR340 SDAtA1-x0xxx-fcc]
for 2003-2003 Sea Ray® 340 Sundancer SDA
340SDA (NOT the 340DA) Sundancer (375 International) with factory installed, forward facing Radar Arch (Spoiler)