Purchase Camper Aft-Curtain (Factory OEM) part number [9xRE300 SN1-x0xxx-Acc] for 1993-1994 Regal® Commodore 300 No Arch Commodore 300, No Radar Arch or Tower
Camper-Top-Aft-Curtain-OEM-G1.2 for 1993-1994 Commodore 300 No Arch
Sea Ray, 340 Sundancer, 2004, Full Camper Canvas Enclosure.
Image (random) of Camper-Top-Aft-Curtain-OEM-G1.2 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Camper AFT CURTAIN with clear Eisenglass windows zips to back of OEM Camper Top and Side Curtains (not included) and connects to Transom, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 1993-1994 digitized patterns approved by Regal® for the Commodore 300 No Arch: Commodore 300, No Radar Arch or Tower:
Notes:
1993-1994 Regal® Commodore 300 No Arch Model Specific Details: You have a choice of a slanted (to transom) Bimini Aft Curtain OR the Full (stand-up) Camper-Top behind the Bimini. The Camper Aft Curtain has an upside down U-Shaped zippered window in the center panel with screen in it. Regal® originally offered the 1993-1994 Commodore 300 No Arch in Sapphire Blue, Persian Green or Burgundy Sunbrella® OR contact us for Pearlescent (white) Aqualon® fabric.
Product Details: Camper Top is an enclosure attached to the back of a Bimini, Sunshade, Convertible Top or Arch that has its own frame to cover to the back of the boat. Includes mounting hardware and Stainless Steel Snaps. When combined with Side-Curtains, the Camper-Top-Aft-Curtains fully enclose the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. Snaps NOT installed in canvas, Snap Tool required. The Aft-Curtain has 25 to 60 standard 3/8" snaps or bungee cords, depending on the boat. Factory Original-Equipment (OEM) canvas made-to-order. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes. Also called: Boston Whaler "Sun-Top" or Grady White "Vista Top".
Regal® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Great Lakes) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Regal® canvas are size #8 (6 teeth/inch). Most (NOT All) Regal® Ameritex® and Taylor-Made® Bimini Tops have zippered frame (bow) pockets for easy installation. Regal® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Regal® boats over 2 years old. Regal® OEM canvas part number scheme: Ameritex® tags [xxxxxxccc], where the' xxxxxx' identifies the canvas piece and 'ccc' is the color code or Great Lakes tags [yyRExxx xAr-xxxxx-fcc], where 'yy' is the year and 'cc' is the color code. Regal® Hull Identification Number (HIN) = RGMsssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {1993,1994} Regal® Commodore 300 No Arch: Commodore 300, No Radar Arch or Tower.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [9xRE300 SN1 -x0xxx-Acc] ("cc" is the color code).
ONLY zips to Factory OEM Camper Top and Side Curtains (no tincluded).
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Will NOT fit after-market top canvas.
Stainless Steel Snaps included but NOT installed in canvas (to allow perfect alignment on install), need Snap Tool.
Includes Mounting Track or Zipper and Snap-Stud-Screws.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery on orders over $500,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Regal Camper-Top-Aft-Curtain-OEM-G1.2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.