Factory Camper AFT CURTAIN with clear Eisenglass windows zips to back of OEM Camper Top and Side Curtains (not included) and connects to Transom, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 1998-1999 digitized patterns approved by Formula® for the 280 BR No Arch:
SQL ERROR 4855: NO match for [formula|280 br no arch||1998|1999|] in Boats Table [DB/Boats2.psv]. ... Redirecting to Formula.shtml#280 in 5 seconds...
Notes:
1998-1999 Formula® 280 BR No Arch Model Specific Details:
Product Details: Aft portion of the Camper-Top canvas which is an enclosure attached to the back of a Forward Bimini, Convertible Top or Arch that has its own frame. When combined with Curtains, the Camper-Top fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. The Aft-Curtain has 25 to 60 standard 3/8" snaps or bungee cords, depending on the boat. Stainless steel Canvas-Snaps are included (If used) but not installed in the canvas. Let us know if you need SS Snap-Stud-Screws to screw into the boat. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes.
Formula® Factory Original Equipment Manufacturer (OEM) Notes:
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White (the tags are approx. 2-3 inches x 4-5 inches),
The ® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {1998,1999} Formula® 280 BR No Arch.
ONLY zips to Factory OEM Camper Top and Side-Curtains.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool Will be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews