Purchase Camper Top Canvas (Factory OEM) part number [yyMO240 SPTSNr-x0xxx-Acc] for 1999-2002 Monterey® 240 Explorer Sport 240SPT Explorer Sport (FULL WINDSHIELD) deck boat WithOut Radar Arch or Tower (NOT the plain 240 Explorer, which has a small windshield at the helm)
Camper-Top-Canvas-OEM-G for 1999-2002 240 Explorer Sport
Monterey, all DB, 2000, Explorer, Bimini Top, Full Enclosure and Camper Enclosure, original brochure, Port side.
Monterey® 240 Explorer Sport shown with Camper-Top-Canvas-OEM-G (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Camper CANVAS (no frame) with zippers for OEM Camper Side and Aft Curtains (not included) (Bimini and other curtains sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 1999-2002 digitized patterns approved by Monterey® for the 240 Explorer Sport: 240SPT Explorer Sport (FULL WINDSHIELD) deck boat WithOut Radar Arch or Tower (NOT the plain 240 Explorer, which has a small windshield at the helm):
Notes:
1999-2002 Monterey® 240 Explorer Sport Model Specific Details: Monterey® actually called the "Forward Bimini" (over the bow area) a "Camper Top" on the Explorer™ deck boats. The "Bimini" on this boat is over the aft Cockpit area. Monterey® originally offered the 1999-2002 240 Explorer Sport in Captain Navy, Forest Green and Burgundy Sunbrella® fabric.
Product Details: The Camper-Top is the single Top canvas piece at the back of the boat (sometimes the front on Bow-Riders or Deck Boats), mounted on a separate Camper-Top-Frame (sold separately) which attaches to the back of a Bimini-Top, Convertible-Top, Arch-Aft-Top or Arch (other tops sold separately). The Camper-Top combines with Curtains (sold separately) to fully enclose the back of the boat providing full, protected (standup) use of the rear cockpit area at the dock. Factory Original-Equipment (OEM) canvas made-to-order.
Included: Single Camper-Top-Canvas piece with Zippers on edges,
NOT Included: Frame, Curtains, Mtg. Hardware, Boot-Cover and other Bimini/Convertible/Arch-Tops and Frames.
Monterey® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Great Lakes or BLI®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Monterey® canvas are size #8 (6 teeth/inch). Monterey® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Monterey® boats over 2 years old. Monterey® OEM canvas part number scheme: tags, where [xxxx] identifies the canvas piece and [ccc] is the color code. Monterey® Hull Identification Number (HIN)= RGFsssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {1999,2000,2001,2002} Monterey® 240 Explorer Sport: 240SPT Explorer Sport (FULL WINDSHIELD) deck boat WithOut Radar Arch or Tower (NOT the plain 240 Explorer, which has a small windshield at the helm).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [yyMO240 SPTSNr -x0xxx-Acc] ("cc" is the color code).
Has pockets to fit onto Factory OEM Camper-Top-Frame bows (frame NOT included).
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Attaches (typically zips) to the back of a Radar Arch, Bimini-Top, Convertible-Top or Sunshade-Top (other tops NOT included).
Has zippers along sides and back for Camper Side and Aft Curtains IF offered (NOT included).
ONLY fits Factory Original-Equipment Camper-Top Frame, Sides and Aft Curtains.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Installation: This replacement top canvas does NOT have Zippers at the Frame Bows, so the Frame MUST be removed and taken apart (at one end typically) to replace the top canvas. Canvas and Snap Installation Instructions