Purchase Camper Top Canvas, SeaMark® fabric (Factory OEM) part number [0ySR52 DA xxx-xxxx-fcc] for 2006-2009 Sea Ray® 52 Sundancer 52DA Sundancer, HIN: SERY xxxxxxxx (Sykes Creek FL plant)
Camper-Top-Canvas-Seamark-OEM-G for 2006-2009 52 Sundancer
Sea Ray, 340 Sundancer, 2004, Full Camper Canvas Enclosure.
Image (random) of Camper-Top-Canvas-Seamark-OEM-G (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Camper CANVAS (no frame) with zippers for OEM Camper Side and Aft Curtains (not included) (Bimini and other curtains sold separately), OEM (Original Equipment Manufacturer) (Camper-Tops may have been SeaMark(r) vinyl-lined Sunbrella(r) prior to 2008 through 2018, now they are Sunbrella(r) to avoid mold issues) in Sunbrella® marine fabric, produced with the same high quality, original 2006-2009 digitized patterns approved by Sea Ray® for the 52 Sundancer: 52DA Sundancer, HIN: SERY xxxxxxxx (Sykes Creek FL plant):
Notes:
2006-2009 Sea Ray® 52 Sundancer Model Specific Details: The Windshield Cover for the 52DA was made in-house by Sea Ray at their Sykes Creek plant and is no longer available. We have the canvas for this boat, but it is not yet listed/priced on our web-site. Please Email for prices. Zippers are size #10 (5 teeth per inch). Sea Ray® originally offered the 2006-2009 52 Sundancer in Sunbrella® (or RECacril®) with SeaMark® (or RECwater®)(vinyl lined, waterproof Sunbrella) tops and 40ga Strataglass® windows OR Contact us for White Stamoid® fabric.
Product Details: The Camper-Top is the single Top canvas piece at the back of the boat (sometimes the front on Bow-Riders or Deck Boats), mounted on a separate Camper-Top-Frame (sold separately) which attaches to the back of a Bimini-Top, Convertible-Top, Arch-Aft-Top or Arch (other tops sold separately). The Camper-Top combines with Curtains (sold separately) to fully enclose the back of the boat providing full, protected (standup) use of the rear cockpit area at the dock. Factory Original-Equipment (OEM) canvas made-to-order.
Included: Single Camper-Top-Canvas piece with Zippers on edges,
NOT Included: Frame, Curtains, Mtg. Hardware, Boot-Cover and other Bimini/Convertible/Arch-Tops and Frames.
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Factory OEM canvas: BLI® tags p/n [0ySR52 DA xxx-xxxx-fcc]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White BLI® tags p/n [0ySR52 DA xxx-xxxx-fcc] (the tags are approx. 2-3 inches x 4-5 inches),
The BLI® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2006,2007,2008,2009} Sea Ray® 52 Sundancer: 52DA Sundancer, HIN: SERY xxxxxxxx (Sykes Creek FL plant).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with BLI® tags p/n [0ySR52 DA xxx-xxxx-fcc] ("cc" is the color code).
Has pockets to fit onto Factory OEM Camper-Top-Frame bows (frame NOT included).
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Attaches (typically zips) to the back of a Radar Arch, Bimini-Top, Convertible-Top or Sunshade-Top (other tops NOT included).
Has zippers along sides and back for Camper Side and Aft Curtains IF offered (NOT included).
ONLY fits Factory Original-Equipment Camper-Top Frame, Sides and Aft Curtains.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Installation: This replacement top canvas does NOT have Zippers at the Frame Bows, so the Frame MUST be removed and taken apart (at one end typically) to replace the top canvas. Canvas and Snap Installation Instructions
Not what you need? Try:
