Purchase Camper Side-Curtains (Factory OEM) part number [1ySR280 DA SAr -xTxxx-fcc] for 2010-2013 Sea Ray® 280 Soft-Top Sundancer 280DA Sundancer With Lace-on Soft-Top on Rigid Aluminum Frame (not the folding Bimini)
Camper-Top-Side-Curtains-OEM-G for 2010-2013 280 Soft-Top Sundancer
Sea Ray, 340 Sundancer, 2004, Full Camper Canvas Enclosure.
Image (random) of Camper-Top-Side-Curtains-OEM-G (additional canvas pieces or covers may also be shown above, click images to enlarge)
Pair Factory Camper SIDE CURTAINS (Port and Starboard sides) with Eisenglass windows zip to OEM Camper Top and Aft Curtain (not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2010-2013 digitized patterns approved by Sea Ray® for the 280 Soft-Top Sundancer: 280DA Sundancer With Lace-on Soft-Top on Rigid Aluminum Frame (not the folding Bimini):
Notes:
2010-2013 Sea Ray® 280 Soft-Top Sundancer Model Specific Details: Email for OEM Canvas. No Carpet Runners were offered on the 2007+ 280DA. We have the Dash Cover for 2008+. The Cockpit Cover goes to the TOP of (Not over) the windshield. Sea Ray® originally offered the 2010-2013 280 Soft-Top Sundancer in Black, Captain Navy (2007, 2008 to hull number 1227) and Marine Midnight (2008 hull number 1228 up) Sunbrella® OR Contact us for White Stamoid® (the Tops and Valances were originally SeaMark® vinyl-lined Sunbrella® through 2013, but are now Sunbrella® to avoid mold issues) fabric.
Product Details: Pair of Camper-Side-Curtains ONLY (NO Bimini-Top, Bimini-Curtains, Camper-Top, Aft-Curtains or Camper-Frame) zip to sides of OEM aft Camper-Top (NOT included) and to Camper-Aft-Curtain (NOT included) at rear of boat (sometimes the front on Bow-Riders or Deck Boats). Snaps (included, but not installed) to boat gunwales at bottom. When combined with Camper-Top (NOT included), Camper-Frame and Camper-Aft-Curtains (NOT included), the combined Camper-Top enclosure fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. Factory Original-Equipment (OEM) canvas made-to-order.
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Factory OEM canvas: GLBT tags p/n [1ySR280 DA SAr -xTxxx-fcc], Sea Ray® p/n [18xxxxx], [19xxxxx] or [20xxxxx]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White GLBT tags p/n [1ySR280 DA SAr -xTxxx-fcc], Sea Ray® p/n [18xxxxx], [19xxxxx] or [20xxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
The GLBT p/® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2010,2011,2012,2013} Sea Ray® 280 Soft-Top Sundancer: 280DA Sundancer With Lace-on Soft-Top on Rigid Aluminum Frame (not the folding Bimini).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [1ySR280 DA SAr -xTxxx-fcc], Sea Ray® p/n [18xxxxx], [19xxxxx] or [20xxxxx] ("cc" is the color code).
ONLY zips to Factory OEM Camper Top and Aft Curtain.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Not what you need? Try:
