Purchase Camper Side-Curtains (Factory OEM) part number [0ySR52 DA xxx-xxxx-fcc] for 2006-2009 Sea Ray® 52 Sundancer 52DA Sundancer, HIN: SERY xxxxxxxx (Sykes Creek FL plant)
Camper-Top-Side-Curtains-OEM-G for 2006-2009 52 Sundancer
Sea Ray, 340 Sundancer, 2004, Full Camper Canvas Enclosure.
Image (random) of Camper-Top-Side-Curtains-OEM-G (additional canvas pieces or covers may also be shown above, click images to enlarge)
Pair Factory Camper SIDE CURTAINS (Port and Starboard sides) with Eisenglass windows zip to OEM Camper Top and Aft Curtain (not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2006-2009 digitized patterns approved by Sea Ray® for the 52 Sundancer: 52DA Sundancer, HIN: SERY xxxxxxxx (Sykes Creek FL plant):
Notes:
2006-2009 Sea Ray® 52 Sundancer Model Specific Details: The Windshield Cover for the 52DA was made in-house by Sea Ray at their Sykes Creek plant and is no longer available. We have the canvas for this boat, but it is not yet listed/priced on our web-site. Please Email for prices. Zippers are size #10 (5 teeth per inch). Sea Ray® originally offered the 2006-2009 52 Sundancer in Sunbrella® (or RECacril®) with SeaMark® (or RECwater®)(vinyl lined, waterproof Sunbrella) tops and 40ga Strataglass® windows OR Contact us for White Stamoid® fabric.
Product Details: Pair of Camper-Side-Curtains ONLY (NO Bimini-Top, Bimini-Curtains, Camper-Top, Aft-Curtains or Camper-Frame) zip to sides of OEM aft Camper-Top (NOT included) and to Camper-Aft-Curtain (NOT included) at rear of boat (sometimes the front on Bow-Riders or Deck Boats). Snaps (included, but not installed) to boat gunwales at bottom. When combined with Camper-Top (NOT included), Camper-Frame and Camper-Aft-Curtains (NOT included), the combined Camper-Top enclosure fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. Factory Original-Equipment (OEM) canvas made-to-order.
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Factory OEM canvas: BLI® tags p/n [0ySR52 DA xxx-xxxx-fcc]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White BLI® tags p/n [0ySR52 DA xxx-xxxx-fcc] (the tags are approx. 2-3 inches x 4-5 inches),
The BLI® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2006,2007,2008,2009} Sea Ray® 52 Sundancer: 52DA Sundancer, HIN: SERY xxxxxxxx (Sykes Creek FL plant).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with BLI® tags p/n [0ySR52 DA xxx-xxxx-fcc] ("cc" is the color code).
ONLY zips to Factory OEM Camper Top and Aft Curtain.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.