Purchase
Cockpit Cover (Factory OEM)
part number [10SR260 SD SN1 -xTxxx-fcc canvas]
for 2010-2010 Sea Ray® 260 Sundeck Tower
260SD Sun Deck with factory installed WaterSports(tm) Tower

Cockpit-Cover-OEM-G3.5™Factory Snap-On COCKPIT-COVER with Adjustable Support Pole(s) fitting into reinforced Snap(s) or Grommet(s), OEM (Original Equipment Manufacturer)

Boat Canvas Identification, Bow Cover, Cockpit Cover.

Great Lakes Bow and Cockpit Cover, Adjustable Support Pole, Snaps.

Images (random) of Cockpit-Cover-OEM-G3.5
(additional canvas pieces or covers may also be shown above, click images to enlarge)

Not what you need? Try:

• Other Factory OEM canvas/covers for the 2010-2010 Sea Ray 260 Sundeck Tower...
• Everything we have for Sea Ray 260 boats... and we have Cockpit-Cover for these other boats...

Factory Snap-On COCKPIT-COVER with Adjustable Support Pole(s) fitting into reinforced Snap(s) or Grommet(s), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2010-2010 digitized patterns approved by Sea Ray® for the 260 Sundeck Tower: 260SD Sun Deck with factory installed WaterSports(tm) Tower:

Notes:
- 2010-2010 Sea Ray® 260 Sundeck Tower Model Specific Details: The Cockpit Cover goes to the TOP of (Not over) the windshield. Sea Ray® originally offered the 2010-2010 260 Sundeck Tower in Black, Marine Midnight, Pewter and Jockey Red Sunbrella® (the Tops and Valances were originally SeaMark® vinyl-lined Sunbrella®, but are now Sunbrella® to avoid mold issues) fabric.
- Product Details: Snaps tightly over the Cockpit area. Comes with one or two (depending on size) Adjustable Aluminum Support Pole(s) with Snap or Grommet through reinforced area in center of Cockpit-Cover. Cockpit-Cover has 30 to 80 standard 3/8" snaps, depending on the boat. Includes Male Snap-Stud-Screws. Factory Original-Equipment (OEM) cover made-to-order.
- Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
- Factory OEM canvas: GLBT tags p/n [10SR260 SD SN1 -xTxxx-fcc canvas], [10SR260 SD SN1 -60xxx-fcc covers], Sea Ray® p/n [19xxxxx]
- Other Factory OEM canvas, frames and covers for the 2010-2010 Sea Ray 260 Sundeck Tower are sold separately here.
Size/Fit:
1. Factory Original-Equipment-Manufacturer (OEM) patterned for the 2010 Sea Ray® 260 Sundeck Tower: 260SD Sun Deck with factory installed WaterSports(tm) Tower.
2. NO Cut-outs (openings) for raised Bimini, Convertible or Camper Frame UNLESS NOTed in the boat's Model Specific Details.
3. Only fits Factory-Original Windshield, Arch/Tower (if so equipped) setups.
4. Snaps included but NOT installed in canvas, so a Snap Installation Tool is required.
5. Made per Factory-Original specification (many Cockpit-Covers do NOT offer special Cut-Outs).
6. Sea Ray® is the ONLY boat mfgr that offers a choice in Cockpit-Cover Cutouts.
7. Ships in a 42inch x 25inch x 7inch Box weighing approximately 38pounds.
8. Check the 2010-2010 Sea Ray® 260 Sundeck Tower Model-Specific-Information abovefor any other size/fit notes and zipper size.
9. Does NOT fit Sea Ray® 260 Sundeck Tower prior to 2010.
10. Does NOT fit Sea Ray® 260 Sundeck Tower after 2010.
11. Does NOT fit any year/make/model other than the 2010-2010 Sea Ray® 260 Sundeck Tower.
Options:
- Sold separately: other Factory Original-Equipment-Manufacturer (OEM) Canvas, Frames and Covers offered by Sea Ray® from 2010 to 2010 for the Sea Ray 260 Sundeck Tower
- Drill NO HOLES in your boat with SNAD™ Adhesive Snaps,
- Canvas Snap Installation Tool,
- Time Saver™ Snap Installation Vice-Grip Attachment (T4-79B Button Anvil and T4-82A Button Clincher) jaw insert set, available online at Freeport, Defender or locally at West Marine,
- Sunbrella Premium Color Upgrade: Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
- Will fit your boat to the specs provided,
- Will match your existing GLBT canvas,
- Will perform as described when installed properly,
- Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Installation:
- Cockpit Cover Installation,
- Installing Male Snap Stud Screws in Fiberglass
Maintenance and Care: Canvas Care and Maintenance
Reviews: American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®
★★★★★

Lead-Time (Estimated): We no longer sell this product.

Your Boat: Sea Ray 260 Sundeck Tower (2010-2010)

12-digit HIN: (required)

Your 12-digit Hull-Identification-Number (HIN) (SERxssssmyxx) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Cockpit Cover (Factory OEM),
Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.

IMPORTANT information required about your 2010-2010 Sea Ray 260 Sundeck Tower:
Wakeboard Tower Model ? (required)

Material/Colors:

Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),
Select Fabric/Color: any Standard color (Prem. colors are extra) Sunbrella® marine fabric. Sea Ray® allows us to make OEM canvas in ANY color on our list below. To match your existing factory-orignial Sea Ray® OEM canvas and covers, we recommend choosing one of these factory (OEM) colors originally offered by Sea Ray® for the 2010-2010 Sea Ray® 260 Sundeck Tower: Black, Marine Midnight, Pewter and Jockey Red Sunbrella® (the Tops and Valances were originally SeaMark® vinyl-lined Sunbrella®, but are now Sunbrella® to avoid mold issues),

or Premium Color Upgrade for Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum Sunbrella® marine fabric.

Price: $1,586.60

We are not selling this online as of 2024

+ Shipping to

This product is not available for purchase at this time...

Please Email SeaRay@RNR-Marine.com
to be notified when Cockpit-Cover-OEM-G3.5
is available for your Sea Ray 260 Sundeck Tower (2010-2010).

Shipping Notes:
- Signature required for delivery,
- Can NOT ship to Post Office (PO) Box,
- Can NOT change your address after order is placed,
- Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
- Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
- Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
- We do NOT ship Sea Ray Cockpit-Cover-OEM-G3.5 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
- Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
- Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.

COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 18.225.35.81 US

$1,586.60

We are not selling this online as of 2024

American Boat Gear™, Inc. DBA American Boat Canvas™, Inc. is rated 5.0 / 5.0 based on 3 American Boat Canvas™ customer reviews on Facebook®

★★★★★

Scroll down to
select options and purchase...

Page: http://rnr-marine.com/Purchase.php?product=Cockpit-Cover-OEM-G3.5&manufacturer=Sea+Ray&model=260+Sundeck+Tower&yearfrom=2010&yearto=2010&partno=10SR260%20SD%20SN1%20-xTxxx-fcc%20canvas

Purchase Cockpit Cover (Factory OEM) part number [10SR260 SD SN1 -xTxxx-fcc canvas] for 2010-2010 Sea Ray® 260 Sundeck Tower 260SD Sun Deck with factory installed WaterSports(tm) Tower

Purchase
Cockpit Cover (Factory OEM)
part number [10SR260 SD SN1 -xTxxx-fcc canvas]
for 2010-2010 Sea Ray® 260 Sundeck Tower
260SD Sun Deck with factory installed WaterSports(tm) Tower