Purchase Convertible Top Frame (Factory OEM) part number [9ySR290 DA SNr-x0xxx-fcc] for 1992-1993 Sea Ray® 290 Sundancer No Arch 290DA Sundancer, NO Radar Arch or Tower
Sea Ray, 290 Sundancer NO Arch, 1993 parts manual canvas drawing, Convertible Top, Camper Top.
Sea Ray, 290 Sundancer NO Arch, 1993, Cockpit Cover, Convertible Top in Boot, Camper Top in Boot, Starboard.
Sea Ray® 290 Sundancer No Arch shown with Convertible-Top-Frame-OEM-G4 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Convertible FRAME for OEM Convertible Top Canvas (not included) which connects to the top of the factory windshield, OEM (Original Equipment Manufacturer) , produced with the same high quality, original 1992-1993 digitized patterns approved by Sea Ray® for the 290 Sundancer No Arch: 290DA Sundancer, NO Radar Arch or Tower:
Notes:
1992-1993 Sea Ray® 290 Sundancer No Arch Model Specific Details: No Bimini (above Windshield) was offered for the 290DA in 1993. The Convertible Side Curtains on this boat are clear with no Sunbrella® colored edge. The 1993 canvas is the same as the 1992 canvas. The Cockpit Cover goes OVER the windshield and snaps at the base of the windshield in front. Sea Ray® originally offered the 1992-1993 290 Sundancer No Arch in Royal Blue Tweed, Charcoal Tweed, Persian Green Tweed (no longer available, replaced with similar Persian Green Solid), Teel Tweed and Dubonnet Tweed Sunbrella® (the Tops and Valances were originally SeaMark® vinyl-lined Sunbrella®, but are now Sunbrella® to avoid mold issues) fabric.
Product Details: Convertible-Top-Framework only (NO Top Canvas, Curtains or Boot, order canvas and mounting hardware separately). The Convertible-Top connects to the top of the windshield, while a Bimini-Top stands above the cockpit (not connected directly to the windshield frame).
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Factory OEM canvas: GLBT tags p/n [9ySR290 DA SNr -x0xxx-fcc], Sea Ray® p/n [5xxxxx] or [6xxxxx]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White GLBT tags p/n [9ySR290 DA SNr -x0xxx-fcc], Sea Ray® p/n [5xxxxx] or [6xxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
The GLBT p/® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {1992,1993} Sea Ray® 290 Sundancer No Arch: 290DA Sundancer, NO Radar Arch or Tower.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [9ySR290 DA SNr -x0xxx-fcc], Sea Ray® p/n [5xxxxx] or [6xxxxx] ("cc" is the color code).
For specific boat, but may fit other models, depending on width and height.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Only the factory OEM Convertible-Top canvas will fit this frame.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Sea Ray Convertible-Top-Frame-OEM-G4 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
