Folds down below windshield and bow rail height to fit in garage or under your boat cover,
Weighs the same as the factory Bimini Top and catches less wind,
Combines the best features our original Montauk-T-Topless™ (MT1™) and lower price of our Montauk-Shadow™ models, yet stiffer with the integrated Stabilizer-Bar, and 2 inches narrower for better side clearance,
Rear-Legs bent for more clearance,
Optional overhead Gear-Loft for PFDs (use your cooler for drinks),
Optional 3-sided Spray Shield enclosure and Gull Wings out to the gunwales (Velcro® and bunji balls)
Trailerable, raised (or lowered),
1 inch OD Type 316L Stainless Steel tubing and fittings to stay shiny forever,
Pair of Rear-Legs (with quick release pins on lanyards),
Curved Rear-Cross-Bar,
Front-Cross-Bar with rail clamps,
Stabilizer-Bar with adjustable rail clamp and quick release pin on lanyard,
(5)each 7/8" or 1" OD Mounting Clamps (Montauks and Outrages are 7/8"),
Sunbrella® canvas and Lacing Cord.
Size/Fit:
1973-2001 Montauk™ 17 & 170: 6'1" to 6'5" height,
2002-2007 Montauk™ 170: 5'11"-6'3" height due to the lower console,
2008-current Montauk™ 170: 6'3" to 6'7" height,
most Montauk™ 150, 18, 19 and 190s,
most Outrage™ 17 thru 22,
most Dauntless™ 15 thru 22,
other (non Whaler) boats with 31-35" wide, raked forward (+5° to +45°) stainless steel windshield grab rails (Not approved for Aluminum rails). Please click for Diagram and Form to Measure your Windshield Grab Rails.
Notes:
Clears 86 or 94 quart Igloo® cooler used on most Whalers,
Allows use of factory rod holders on front of Console,
Allows use of factory rod holders on Reversible Pilot Seat,
Overall height will be approximately 27" to 29" above the windshield grab rails (1-2" can be gained by mounting the rear legs higher),
Fits 7/8" or 1" inch OD. Stainless Steel Windshield Grab Rails,
Does NOT fit 3/4", 1.060", 1.080", 1.125", 1.90" or 2" inch rails,
Fits under all standard Boat Covers,
Use our Spray Shield instead of a Console Cover,
Ships (fully insured) via Fedex® or UPS® in a heavy duty 74"x22"x7" x 37lb box (signature required).
Options:
Whaler-Grab-Rail-Supports stiffen Montauk™ and Outrage™ windshield rails (recommended for rough seas),
Gear-Loft stores 4-6 PFDs above your head (Black Phifertex® material breathes to keep gear dry and mildew free),
Spray Shield 3-sided windshield for 1973-2001 Montauk™ 17/170 and Outrage™ 18,
Gull Wings zip to Spray Shield for additional protection,
Installation:Installs in an hour or two as per the Montauk-T-Topless-2™ (MT2™) Installation Guide. The rear leg can be mounted to the back of the Windshield Grab Rails or to the Reversible Pilot Seat.