Purchase Sunshade Top Canvas (Factory OEM) part number [1ySR330 DA HAr-xxxxx-fcc] for 2015-2024 Sea Ray® 330 Sundancer 330SDA Sundancer with factory installed, forward facing Hard Top (Radar Arch) and std Aluminum windshield frames
Sea Ray, 330 Sundancer, 2013, Sunshade Top.
Image (random) of Sunshade-Top-Canvas-OEM-G4.2 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory SUNSHADE CANVAS (no frame) for OEM Sunshade Top mounted off Back of the factory Radar Arch, with zippers for OEM Sunshade Aft Enclosure Curtains (not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2015-2024 digitized patterns approved by Sea Ray® for the 330 Sundancer: 330SDA Sundancer with factory installed, forward facing Hard Top (Radar Arch) and std Aluminum windshield frames:
Notes:
2015-current Sea Ray® 330 Sundancer Model Specific Details: Stainless Steel frames. The Cockpit Cover goes to the TOP of (Not over) the windshield. The Aft-Enclosure Curtains and Cockpit Cover connect to the top of the transom with Bunjis. Sea Ray® began offering a Camper Top for shade (which zips to the back of the Sunshade-Top), but NO Camper Side or Aft enclosure curtains for the 330DA in 2013. All Sea Ray Sundancer Visors have (3) panels that zip open separately. Sea Ray® originally offered the 2015-current 330 Sundancer in Black, Marine Midnight and Toast Tweed Sunbrella® fabric.
Product Details: To replace worn, damaged or old Sunshade-Top (the top that is mounted behind the radar arch) Canvas. Canvas only (no frames). Factory Original-Equipment (OEM) canvas made-to-order.
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Factory OEM canvas: GLBT tags p/n [1ySR330 DA HAr -xxxxx-fcc], Sea Ray® p/n [19xxxxx] or [2xxxxxx]
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White GLBT tags p/n [1ySR330 DA HAr -xxxxx-fcc], Sea Ray® p/n [19xxxxx] or [2xxxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
The GLBT p/® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2015,2016,2017,2018,2019,2020,2021,2022,2023,2024} Sea Ray® 330 Sundancer: 330SDA Sundancer with factory installed, forward facing Hard Top (Radar Arch) and std Aluminum windshield frames.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [1ySR330 DA HAr -xxxxx-fcc], Sea Ray® p/n [19xxxxx] or [2xxxxxx] ("cc" is the color code).
ONLY fits Factory OEM Arch and Sunshade-Top Frame and zips to Camper or Aft-Curtain with GLBT tags.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Installation: This replacement top canvas does NOT have Zippers at the Frame Bows, so the Frame MUST be removed and taken apart (at one end typically) to replace the top canvas. Canvas and Snap Installation Instructions
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Sea Ray Sunshade-Top-Canvas-OEM-G4.2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.