Purchase Sunshade Top Valance, SeaMark® fabric (Factory OEM) part number [02SR280 DA SA1-x0xxx-fcc] for 2002-2002 Sea Ray® 315 Sundancer 315 International (US 280DA) Sundancer with factory installed, forward facing Radar Arch and STANDARD ALUMINUM WINDSHIELD (No Stainless Steel W/S offered)
Valance Which Needs To Be Replaced (Example is Bimini Valance on Sea Ray Sundancer).
Valance, Keder Welt, Zipper Strip.
Images (random) of Sunshade-Top-Valance-SeaMark-OEM-G1 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Sunshade VALANCE (Zipper strip to Arch) joins the OEM Aft Sunshade Top (not included) and Aft Enclosure Curtains (not included) to the Back of the Radar Arch, OEM (Original Equipment Manufacturer) (Valances may have been SeaMark(r) vinyl-lined Sunbrella(r) prior to 2008 through 2018, now they are Sunbrella(r) to avoid mold issues) in Sunbrella® marine fabric, produced with the same high quality, original 2002-2002 digitized patterns approved by Sea Ray® for the 315 Sundancer: 315 International (US 280DA) Sundancer with factory installed, forward facing Radar Arch and STANDARD ALUMINUM WINDSHIELD (No Stainless Steel W/S offered):
Notes:
2002-2002 Sea Ray® 315 Sundancer Model Specific Details: The Bimini and Sunshade Valances have (4) zippers each: (2) across each top and (1) down each side. The Sunshade Top behind the Arch is offered with an angled Sunshade Aft Curtain OR a 'stand-up' Camper Top with Side and Aft Curtains. Bimini Top boots have Sea Ray® logo. The Cockpit Cover goes OVER the windshield and snaps at the base of the windshield in front. A Stainless steel Windshield was NOT offered as an option on this boat. Sea Ray® originally offered the 2002-2002 315 Sundancer in Black, Mediterranean Blue Tweed, Hunter Green Tweed and Toast Tweed Sunbrella® (the Tops and Valances were originally SeaMark® vinyl-lined Sunbrella®, but are now Sunbrella® to avoid mold issues) fabric.
Product Details: Sunshade-Top-Valance is a narrow (1-2 inch wide) Sunbrella fabric zipper strip with Keder Welt along one edge to slide into the Track on the Back of the Radar Arch (or hard-Top) and Zippers (White, typically 3 or 4) along the other edge to zip onto the aft Sunshade-Top (NOT included) and Sunshade Aft Enclosure Curtains (NOT included). Factory Original-Equipment (OEM) canvas made-to-order.
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the 2002 Sea Ray® 315 Sundancer: 315 International (US 280DA) Sundancer with factory installed, forward facing Radar Arch and STANDARD ALUMINUM WINDSHIELD (No Stainless Steel W/S offered).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [02SR280 DA SA1 -x0xxx-fcc], Sea Ray® p/n [16xxxxx] ("cc" is the color code).
Slides in Flex-A-Rail track on Back of Radar Arch and has Zippers to zip to the aft Sunshade-Top canvas (NOT included).
Only fits Factory OEM Sunshade-Top, Radar Arch and Track with GLBT tags on mating Visor.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery on orders over $500,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Sea Ray Sunshade-Top-Valance-SeaMark-OEM-G1 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.