Purchase Bimini Boot, Aqualon™ fabric (Factory OEM) part number [101xxxccc - S-TB 280SS RA] for 2001-2002 Formula® 280 SS Arch F-280 Sun Sport with factory installed Radar Arch
Bimini Boot.
Image (random) of Bimini-Boot-Aqualon-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Zippered Bimini BOOT COVER, OEM (Original Equipment Manufacturer) , Mustang(r) (was Aqualon(tm), which is no longer available) Fabric) in Aqualon™ fabric, produced with the same high quality, original 2001-2002 digitized patterns approved by Formula® for the 280 SS Arch: F-280 Sun Sport with factory installed Radar Arch:
Notes:
2001-2002 Formula® 280 SS Arch Model Specific Details: Email for OEM canvas and covers information and prices. The Camper Aft Curtain has Screens, the Camper Side Curtains do not. Type 316L stainless steel top frame. Formula® originally offered the 2001-2002 280 SS Arch in Pacific Blue (2001), Mediterranean Blue Tweed (2002-2004), Cadet Grey, Forest Green, Linen Tweed (2001), Taupe (2002-2004, no longer available, Formula has replaced this with similar TOAST TWEED) or Jockey Red (no longer available in SeaMark, replaced by Dubonnet Tweed)(2001) Sunbrella® with SeaMark® vinyl lined waterproof Sunbrella® tops (Silver Connector and Side Curtains in 2001) OR contact us to quote Pearlescent (white) Aqualon® fabric.
Product Details: Boot cover to cover and protect Bimini-Top (Not included) when not in use. Some Bimini-Boots have the boat manufacturer logo (Chaparral or Formula for example) embroidered or silk screened in boat manufacturers specified thread color: typically black, white, silver or tan (gold), depending on the fabric color. Formula® uses Silver thread for their embroidered logo. If we do not have a logo available, the part is sold without the logo. If you are concerned about the logo color, please email and ask.
Formula® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size:
#8 (6 teeth/inch) used up to early 2005 and from 2009 forward,
#10 (5 teeth/inch) used on most (not all) boats from the end of 2005 through the 2008 model year
(it is necessary to check your zipper size when ordering 2005-1008 canvas: simply measure the number of teeth over 2 inches and divide by 2 for accuracy)
. Boot Covers MAY have the Formula® logo embroidered in Silver, Gold, Black or White (Formula specified depending on fabric color). All Formula® frame bows and hardware are Type 316L Stainless Steel. All Formula® Tops are sewn with Gore(®) Tenara(®) Thread to avoid rotting. Most (NOT All) Formula® Tops have zippered frame (bow) pockets for easy installation. Formula® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Formula® made their factory OEM Bow, Cockpit and Mooring Covers in-house themselves, so we do NOT have them. We can only sell canvas and covers direct for Formula® boats over 2 years old. OEM canvas part number scheme: [xxxxx] identifies the canvas piece and [ccc] is the color code. Formula® Hull Identication Number (HIN) scheme is TNRsssssmbyy, where [yy] is the model year.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size: