Purchase Bimini Boot, Aqualon™ fabric (Factory OEM) part number [105xxxccc - S-TB 241] for 2006-2007 Formula® 240 Bowrider Formula Tower F-240 Bow Rider with Formula(r) Factory Polished Stainless Steel Sport Tower
Formula, 240 Bowrider Formula Tower, 2006, Polished Formula Tower, Bimini Top in Boot, Starboard side.
Formula, 240 Bowrider Formula Tower, 2007, Polished Formula Tower, Bimini Top in Boot, Starboard side.
Formula® 240 Bowrider Formula Tower shown with Bimini-Boot-Aqualon-OEM-T3 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Zippered Bimini BOOT COVER, OEM (Original Equipment Manufacturer) , Mustang(r) (was Aqualon(tm), which is no longer available) Fabric) in Aqualon™ fabric, produced with the same high quality, original 2006-2007 digitized patterns approved by Formula® for the 240 Bowrider Formula Tower: F-240 Bow Rider with Formula(r) Factory Polished Stainless Steel Sport Tower:
Notes:
2006-2007 Formula® 240 Bowrider Formula Tower Model Specific Details: Size #10 (5 teeth/inch) Zippers (not #8 = 6 teeth/inch as used from 2008-2011). Type 316L stainless steel Bimini Top frame. Connector and Side Curtains snap to the top of the windshield. The Camper Aft Curtain has a U-Shaped window with screen in it. Formula® originally offered the 2006-2007 240 Bowrider Formula Tower in Black, Mediterranean Blue Tweed, Cadet Grey, Sapphire (no longer available), Gulfstream (light blue, code color 663, Formula exclusive color, no longer available) Yellow (no longer available), Black Cheery (no longer available) or Jockey Red (no longer available in SeaMark, replaced by Dubonnet Tweed)Sunbrella® with SeaMark® vinyl line Sunbrella Top OR contact us for Pearlescent (white) Aqualon® fabric.
Product Details: Boot cover to cover and protect Bimini-Top (Not included) when not in use. Some Bimini-Boots have the boat manufacturer logo (Chaparral or Formula for example) embroidered or silk screened in boat manufacturers specified thread color: typically black, white, silver or tan (gold), depending on the fabric color. Formula® uses Silver thread for their embroidered logo. If we do not have a logo available, the part is sold without the logo. If you are concerned about the logo color, please email and ask.
Formula® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size:
#8 (6 teeth/inch) used up to early 2005 and from 2009 forward,
#10 (5 teeth/inch) used on most (not all) boats from the end of 2005 through the 2008 model year
(it is necessary to check your zipper size when ordering 2005-1008 canvas: simply measure the number of teeth over 2 inches and divide by 2 for accuracy)
. Boot Covers MAY have the Formula® logo embroidered in Silver, Gold, Black or White (Formula specified depending on fabric color). All Formula® frame bows and hardware are Type 316L Stainless Steel. All Formula® Tops are sewn with Gore(®) Tenara(®) Thread to avoid rotting. Most (NOT All) Formula® Tops have zippered frame (bow) pockets for easy installation. Formula® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Formula® made their factory OEM Bow, Cockpit and Mooring Covers in-house themselves, so we do NOT have them. We can only sell canvas and covers direct for Formula® boats over 2 years old. OEM canvas part number scheme: [xxxxx] identifies the canvas piece and [ccc] is the color code. Formula® Hull Identication Number (HIN) scheme is TNRsssssmbyy, where [yy] is the model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2006,2007} Formula® 240 Bowrider Formula Tower: F-240 Bow Rider with Formula(r) Factory Polished Stainless Steel Sport Tower.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [105xxxccc - S-TB 241] ("ccc" is the color code).
Only fits Factory Original-Equipment Bimini-Top Frame and Canvas.
Verify Ameritex® or Taylor-Made® tags on existing Bimini Top).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.
Shipping Notes:
Signature required for delivery on orders over $500,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Formula Bimini-Boot-Aqualon-OEM-T3 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size: