Purchase Bimini Side-Curtains (Factory OEM) part number [yyMO262 SNr-x0xxx-Acc] for 1997-2002 Monterey® 262 Cruiser 262CR Cruiser WithOut Radar Arch or Tower
Monterey, 262 Cruiser, 2002, Bimini, Visor, Side Curtains, Camper Top, Camper Side Curtains, Camper Aft Curtain, Port Front.
Monterey, 262 Cruiser, 2000, Bimini, Visor, Side Curtains, Camper Top, Camper Side Curtains, Camper Aft Curtain, Starboard Rear.
Monterey® 262 Cruiser shown with Bimini-Side-Curtains-OEM-G1.2 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Pair Factory Bimini SIDE CURTAINS (Port and Starboard sides) zips to side of OEM Bimini-Top (not included) (NO front Visor, aka Windscreen, sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 1997-2002 digitized patterns approved by Monterey® for the 262 Cruiser: 262CR Cruiser WithOut Radar Arch or Tower:
Notes:
1997-2002 Monterey® 262 Cruiser Model Specific Details: Only have Camper Top canvas pieces for 1997 and early 1998 boats (1999 Camper Top Fabric pattern LOST). Aluminum top frames. The Cockpit Cover goes OVER the windshield and has Cut-Outs to allow the Bimini and Camper Top Frames to remain raised. Monterey® originally offered the 1997-2002 262 Cruiser in Black (2001-2002), Captain Navy, Forest Green, Black Cherry (1997-1998) and Burgundy (1999-2002) Sunbrella® fabric.
Product Details: The pair of Bimini-Side-Curtains are clear Eisenglass (clear vinyl) windows (port and starboard side included) that zip between the sides of the Bimini-Top and the sides of the windshield or hull. The Side-Curtains either snap onto or slide into tracks on the back edges of the windshield (and hull in many cases), The Side-Curtains have Zippers on the top (for the Bimini), front (to connect to the front Visor) and back edge (to the Arch, Bimini-Aft-Curtain or Camper-Side-Curtains if so equipped) to form part of a complete eisenglass enclosure. Bimini-Top, Visor and other Curtains are NOT included. Often part of "Weather Enclosure". Factory Original-Equipment (OEM) canvas made-to-order.
Monterey® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Great Lakes or BLI®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Monterey® canvas are size #8 (6 teeth/inch). Monterey® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Monterey® boats over 2 years old. Monterey® OEM canvas part number scheme: tags, where [xxxx] identifies the canvas piece and [ccc] is the color code. Monterey® Hull Identification Number (HIN)= RGFsssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {1997,1998,1999,2000,2001,2002} Monterey® 262 Cruiser: 262CR Cruiser WithOut Radar Arch or Tower.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with OEM canvas: GLBT tags p/n [yyMO262 SNr -x0xxx-Acc] ("cc" is the color code).
ONLY zips to Factory OEM Bimini-Top and Visor with GLBT tags.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Stainless Steel Snaps included but NOT installed in canvas, Snap Tool required.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery on orders over $500,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Monterey Bimini-Side-Curtains-OEM-G1.2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.