Pair Factory Bimini SIDE CURTAINS (Port and Starboard sides) zips to side of OEM Bimini-Top (not included) (NO front Visor, aka Windscreen, sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2005-2009 digitized patterns approved by Scout® for the 222 Abaco walk around, O/B:
Notes:
2005-2009 Scout® 222 Abaco Model Specific Details: Stainless steel Bimini Top frame (bows). Scout® originally offered the 2005-2009 222 Abaco in Black, Captain Navy, Royal Blue Tweed (2005-2006) and Toast Tweed (2007-2009) Sunbrella® fabric.
Product Details: The pair of Bimini-Side-Curtains are clear Eisenglass (clear vinyl) windows (port and starboard side included) that zip between the sides of the Bimini-Top and the sides of the windshield or hull. The Side-Curtains either snap onto or slide into tracks on the back edges of the windshield (and hull in many cases), The Side-Curtains have Zippers on the top (for the Bimini), front (to connect to the front Visor) and back edge (to the Arch, Bimini-Aft-Curtain or Camper-Side-Curtains if so equipped) to form part of a complete eisenglass enclosure. Bimini-Top, Visor and other Curtains are NOT included. Often part of "Weather Enclosure". Factory Original-Equipment (OEM) canvas made-to-order.
Scout® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Great Lakes) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Scout® canvas are size #8 (6 teeth/inch). All Scout® top frames (bows) are Stainless Steel. Most (NOT All) Scout® Ameritex® Bimini Tops have zippered frame (bow) pockets for easy installation. Scout® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Scout® boats over 2 years old. OEM canvas part numbers: -- tags p/n [yySBmmm mm tar-xxxxx-fcc], where [yy] is the year, [SB] is Scout® Boats, [mmm mm] is the model ([222 SF ] for example), [t] is the type of windshield (S=Std or W=optional stainless), [a] is (A)rch or (N)o Arch, [r] is the revision, [xxxxx] identifies the canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code., -- Ameritex®tags p/n [nnnxxxccc], where [nnn] identifies the boat, [xxx] is the canvas piece and [ccc] is color code. Scou® HIN = SLPsssssmbyy , yy=model-year.
Factory OEM canvas: GLBT tags p/n [yySB222 AB tNr -xxxxx-Acc], Scout® p/n [UH10xx] (hard-top setup) OR [UH8xx] (bimini-top setup
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White GLBT tags p/n [yySB222 AB tNr -xxxxx-Acc], Scout® p/n [UH10xx] (hard-top setup) OR [UH8xx] (bimini-top setup (the tags are approx. 2-3 inches x 4-5 inches),
The GLBT p/® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2005,2006,2007,2008,2009} Scout® 222 Abaco walk around, O/B.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [yySB222 AB tNr -xxxxx-Acc], Scout® p/n [UH10xx] (hard-top setup) OR [UH8xx] (bimini-top setup ("cc" is the color code).
ONLY zips to Factory OEM Bimini-Top and Visor with GLBT tags.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Stainless Steel Snaps included but NOT installed in canvas, Snap Tool required.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery on orders over $500,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Scout Bimini-Side-Curtains-OEM-G1.5 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.