Purchase Bimini Side-Curtains (Factory OEM) part number [std seating: 0ySR200BRSSINr -xTxxx-fcc] for 2004-2005 Sea Ray® 200 Bowrider Select 200BRS Bowrider Select, NO Tower, I/O Sterndrive
Sea Ray, 200 Bowrider Select, 2004 parts manual canvas drawing, Bimini Top, Bimini Visor, Bimini Side and Aft Curtains, Bow Cover.
Sea Ray® 200 Bowrider Select shown with Bimini-Side-Curtains-OEM-G1.5 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Pair Factory Bimini SIDE CURTAINS (Port and Starboard sides) zips to side of OEM Bimini-Top (not included) (NO front Visor, aka Windscreen, sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2004-2005 digitized patterns approved by Sea Ray® for the 200 Bowrider Select: 200BRS Bowrider Select, NO Tower, I/O Sterndrive:
Notes:
2004-2005 Sea Ray® 200 Bowrider Select Model Specific Details: The Cockpit Cover goes OVER the windshield and snaps at the base of the windshield in front. Sea Rays with 12-digit Hull Identification Number (HIN) beginning with SERA were made in Arizona for which we do NOT have OEM canvas patterns (this boat was built by Sea Ray in AZ and TN): our Tennessee Sea Ray® Bow Covers, Cockpit Covers and Carpet Runners we offer will fit Arizona boats, however the original Arizona top frame(s) were made by someone else, so our Tennessee Bimini, Sunshade and Camper replacement canvas will NOT fit Arizona frames, AND our Visor, Side or Aft Curtains will NOT zip properly to original Arizona top canvas, BUT ALL Arizona canvas AND frames can typically be replaced as a set, however we do NOT guarantee fit. Sea Ray® originally offered the 2004-2005 200 Bowrider Select in Black, Charcoal Tweed, Mediterranean Blue Tweed, Hunter Green Tweed and Jockey Red Sunbrella® fabric (the Bimini Top was originally SeaMark® vinyl-lined Sunbrella®, but is now Sunbrella® to avoid mold issues) fabric.
Product Details: The pair of Bimini-Side-Curtains are clear Eisenglass (clear vinyl) windows (port and starboard side included) that zip between the sides of the Bimini-Top and the sides of the windshield or hull. The Side-Curtains either snap onto or slide into tracks on the back edges of the windshield (and hull in many cases), The Side-Curtains have Zippers on the top (for the Bimini), front (to connect to the front Visor) and back edge (to the Arch, Bimini-Aft-Curtain or Camper-Side-Curtains if so equipped) to form part of a complete eisenglass enclosure. Bimini-Top, Visor and other Curtains are NOT included. Often part of "Weather Enclosure". Factory Original-Equipment (OEM) canvas made-to-order.
Sea Ray® Factory Original Equipment Manufacturer (OEM) Notes: Zippers on Sea Ray® canvas are size #8 (6 teeth/inch) up to 35 foot, #10 over 35 foot (5 teeth/inch). Cockpit Covers for open bridge boats (Sundancer, SunDeck, SunSport, SLX, Bowrider, Express Cruiser, Weekender) prior to 2008 cover the windshield, 2008 and newer attach to Top of windshield. Embroidered Sea Ray® logo on SOME (when offered by Sea Ray) Boot Covers was Tan (gold) until 2011, then Silver 2012 and newer. Sea Ray® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Sea Ray® boats over 2 years old. Sea Ray® OEM canvas/covers part numbers: [yySRmmm mm tar-xxxxx-fcc] where [yy] is the model year, [SR] is Sea Ray®, [mmm mm] is the boat model, [t] is the type of window or drive (S=Std-Windshield, W=optional-stainless-Windshield, I=I/O-sterndrive, O=Outboard), [a] is (A)rch or (N)o-arch, [r] is the revision, [xxxxx] identifies which canvas piece, [f] is the fabric (A=Sunbrella® acrylic, S=SeaMark®) and [cc] is the color code. Sea Ray® Hull Identification Number (HIN) = SERpssssmbyy , where [p] = mfg plant, [yy] = model-year.
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White GLBT tags p/n [std seating: 0ySR200BRSSINr -xTxxx-fcc] or [sunpad: 0ySR200BSSPINr -xTxxx-fcc], Sea Ray® p/n [14xxxxx], [16xxxxx] or [17xxxxx] (the tags are approx. 2-3 inches x 4-5 inches),
The GLBT p/® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2004,2005} Sea Ray® 200 Bowrider Select: 200BRS Bowrider Select, NO Tower, I/O Sterndrive.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with GLBT tags p/n [std seating: 0ySR200BRSSINr -xTxxx-fcc] or [sunpad: 0ySR200BSSPINr -xTxxx-fcc], Sea Ray® p/n [14xxxxx], [16xxxxx] or [17xxxxx] ("cc" is the color code).
ONLY zips to Factory OEM Bimini-Top and Visor with GLBT tags.
Verify that your old and mating canvas has GLBT on the tags and embossed on the Canvas Snaps AND factory #8 zippers (6 teeth/inch), NOT #10 (5 teeth/inch) which are After-Market zippers.
Stainless Steel Snaps included but NOT installed in canvas, Snap Tool required.
100% Guarantee: We guarantee our mooring covers, bow covers, cockpit covers, bimini tops, camper tops, and other marine canvas enclosures
Will fit your boat to the specs provided,
Will match your existing GLBT canvas,
Will perform as described when installed properly,
Will completely satisfy you with the quality and construction.
You can count on all of the above or else the boat top or enclosure will be replaced or your money returned. Your boat is a large investment so be sure you protect it with the best marine canvas direct from the factory.
Warranty: This product is covered by the Manufacturer's Warranty.
Lead-Time (Estimated): We no longer sell this product.
Shipping Notes:
Signature required for delivery on orders over $500,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Sea Ray Bimini-Side-Curtains-OEM-G1.5 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.