Purchase Bimini Side-Curtains (Factory OEM) part number [2004: 1027xxccc - S-TP 2502FX] for 2004-2009 Trophy® 2502 WA 2502WA (2502FX) walk around cuddy with factory installed Top
Trophy, 2502 WA, 2004, Bimini Top, Front Connector, Side Curtains, Starboard Front.
Trophy® 2502 WA shown with Bimini-Side-Curtains-OEM-T1.7 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Pair Factory Bimini SIDE CURTAINS (Port and Starboard sides) with Eisenglass windows zips to sides of OEM Bimini-Top (Not included, sold separately), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2004-2009 digitized patterns approved by Trophy® for the 2502 WA: 2502WA (2502FX) walk around cuddy with factory installed Top:
Notes:
2004-2009 Trophy® 2502 WA Model Specific Details: The front Connector (single panel), Side Curtains and Aft-Curtain do NOT have U-shaped windows that zip open. The Aft-Curtain has a center door that zips one. If you do not have a Black tag with P/N or White tag with a legible Part Number on your Hard-Top canvas, just enter P/N 123456789 and make up a DT date code between 2011 and 2019, and we can look up the Hard-Top canvas in our Sales System. Trophy® originally offered the 2004-2009 2502 WA in Royal Blue Tweed [017] or Hemlock Tweed [005] Sunbrella® acrylic replaces original Recacril® Blue Tweed [772] or Green Tweed [771] acrylic which are no longer available fabric.
Product Details: The pair of Bimini-Side-Curtains are clear Eisenglass (clear vinyl) windows (port and starboard side included) that zip between the sides of the Bimini-Top and the sides of the windshield or hull. The Side-Curtains either snap onto or slide into tracks on the back edges of the windshield (and hull in many cases), The Side-Curtains have Zippers on the top (for the Bimini), front (to connect to the front Connector windshield) and back edge (to the Arch, Bimini-Aft-Curtain or Camper-Side-Curtains if so equipped) to form part of a complete eisenglass enclosure. Bimini-Top, front Connector and other Curtains are NOT included.
Trophy® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker). White canvas (and frames) were made prior to 2002 by another manufacturer (or Bayliner®) and our 2001+ canvas (Blue or Green Tweed) will NOT zip to any white canvas OR fit any frames used with WHITE canvas (different size/shape); Trophy® made few changes to their boats over the years, so you should be able to replace ALL of the canvas (and frame on Bimini setups) for a good fit on boats older than 2002 (it may be necessary to move the tracks on Hard-Tops). Zippers on OEM Trophy® canvas are size #8 (6 teeth/inch). Most (NOT All) Trophy® Bimini Tops have zippered frame (bow) pockets for easy installation. Trophy® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Trophy® Hull Identificatio Number (HIN) = Txxpssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2004,2005,2006,2007,2008,2009} Trophy® 2502 WA: 2502WA (2502FX) walk around cuddy with factory installed Top.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [2004: 1027xxccc - S-TP 2502FX] or [2005-2009: 1055xxccc - S-TP 2502FX] ("ccc" is the color code).
ONLY zips to Factory OEM Bimini-Top and Connector.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool may be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Trophy Bimini-Side-Curtains-OEM-T1.7 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.