Purchase Bimini Top Frame (Factory OEM) part number [11xxxxccc - RK 210] for 2012-2016 Rinker® 220 MTX Bowrider NO Tower 220 MTX Bowrider, No Tower or Radar Arch, I/O sterndrive
Rinker, 220 MTX Bowrider NO Tower, 2013, Bimini Top in Boot, Bow Cover, Cockpit Cover, Front.
Rinker, 220 MTX Bowrider NO Tower, 2013, Bimini Top in Boot, Bow Cover, Cockpit Cover, Port Front.
Rinker® 220 MTX Bowrider NO Tower shown with Bimini-Top-Frame-OEM-T0.7 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Bimini FRAME (NO Canvas), OEM (Original Equipment Manufacturer) , produced with the same high quality, original 2012-2016 digitized patterns approved by Rinker® for the 220 MTX Bowrider NO Tower: 220 MTX Bowrider, No Tower or Radar Arch, I/O sterndrive:
Notes:
2012-2016 Rinker® 220 MTX Bowrider NO Tower Model Specific Details: Bimini Top frame is Aluminum. The Front Connectors snaps to the top of the windshield. #8 zippers. Bimini Boot does not have the Rinker logo. Connector and Curtains do not have screens or zip-open windows. The Cockpit Cover has cutouts for the Bimini Top frame to pass through to remain raised. If you have missing or illegible tags on your canvas or cover, we have prior sales of 2012-2026 Rinker 220 MTX Bowriders without Tower, so please EMAIL us to see if we can still make this canvas. Rinker® originally offered the 2012-2016 220 MTX Bowrider NO Tower in Black, Royal Blue Tweed , Sky Blue, Pacific Blue, Taupe , Linen Tweed , Sunflower Yellow , Jockey Red or Dubonnet Tweed Sunbrella® fabric.
Product Details: Framework only. Order canvas and mounting hardware separately. A Bimini-Top stands above the cockpit (not connected directly to the windshield frame), while a Convertible-Top connects to the top of the windshield.
Rinker® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Rinker® boats over 2 years old. Rinker® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Rinker® Hull Identification Number (HIN) = RNKsssssmbyy , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2012,2013,2014,2015,2016} Rinker® 220 MTX Bowrider NO Tower: 220 MTX Bowrider, No Tower or Radar Arch, I/O sterndrive.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [11xxxxccc - RK 210] ("ccc" is the color code).
WE MUST HAVE THE P/N FROM THE STICKER ON YOUR OLD FRAME TO PROCEED.
Only fits factory OEM Bimini-Top Canvas.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Ships in a 96inch x 5inch x 69inch Box weighing approximately 25pounds.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Rinker Bimini-Top-Frame-OEM-T0.7 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews