Purchase
Bow Cover (Factory OEM)
part number [1121xxccc]
for 2011-2016 Rinker®
200 MTX Bowrider, No Tower or Radar Arch, I/O Sterndrive

Bow-Cover-OEM-T1™Factory Snap-On BOW COVER with Adjustable Aluminum Support Pole and reinforced Snap for Pole Alignment in Center of Cover on Larger Bow-Covers, OEM (Original Equipment Manufacturer)

Boat Canvas Identification, Bow Cover, Cockpit Cover.

Image (random) of Bow-Cover-OEM-T1
(additional canvas pieces or covers may also be shown above, click images to enlarge)

Not what you need? Try:

• Other Factory OEM canvas/covers for the 2011-2016 Rinker 200 MTX Bowrider...
• Everything we have for Rinker 200 boats... and we have Bow-Cover for these other boats...

Factory Snap-On BOW COVER with Adjustable Aluminum Support Pole and reinforced Snap for Pole Alignment in Center of Cover on Larger Bow-Covers, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2011-2016 digitized patterns approved by Rinker® for the 200 MTX Bowrider, No Tower or Radar Arch, I/O Sterndrive:

Notes:
- 2011-2016 Rinker® 200 MTX Bowrider Model Specific Details: We MUST have the P/N from your existing canvas or cover for the 2011-2016 Rinker 200 MTX Bowrider. Rinker® originally offered the 2011-2016 200 MTX Bowrider in Black, Sunflower Yellow, Jockey Red or Dubonnet Tweed Sunbrella® fabric.
- Product Details: Covers open bow area. Bow-Cover has 25 to 60 standard 3/8" snaps, depending on the boat. Includes Male Snap-Stud-Screws. Premium (extra cost) Sunbrella colors are: Jockey Red, Yellow, Logo Red, Burgundy, and Orange.
- Rinker® Factory Original Equipment Manufacturer (OEM) Notes: A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them for 2010+ boats. Zippers on OEM Rinker® canvas are size #8 (6 teeth/inch). Most (NOT All) Rinker® Bimini and Camper Tops have zippered frame (bow) pockets for easy installation. Rinker® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Rinker® boats over 2 years old. Rinker® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Rinker® Hull Identification Number (HIN) = RNKsssssmbyy , where [yy] = model year.
- Factory OEM canvas: Ameritex® tags p/n [1121xxccc]
- Other Factory OEM canvas, frames and covers for the 2011-2016 Rinker 200 MTX Bowrider are sold separately here.
Size/Fit:

Factory Original-Equipment-Manufacturer (OEM) patterned for the 2011-2016 Rinker® 200 MTX Bowrider, No Tower or Radar Arch, I/O Sterndrive.
Stainless Steel Snaps included but NOT installed in canvas, Snap Tool required.
This will allow for a perfect field fit.
Check the 2011-2016 Rinker® 200 MTX Bowrider Model-Specific-Information abovefor any other size/fit notes and zipper size.
Does NOT fit Rinker® 200 MTX Bowrider prior to 2011.
Does NOT fit Rinker® 200 MTX Bowrider after 2016.
Does NOT fit any year/make/model other than the 2011-2016 Rinker® 200 MTX Bowrider.
Options:
Sold separately: other Factory Original-Equipment-Manufacturer (OEM) Canvas, Frames and Covers offered by Rinker® from 2011 to 2016 for the Rinker 200 MTX Bowrider

Drill NO HOLES in your boat with SNAD™ Adhesive Snaps,
Canvas Snap Installation Tool,
Time Saver™ Snap Installation Vice-Grip Attachment (T4-79B Button Anvil and T4-82A Button Clincher) jaw insert set, available online at Freeport, Defender or locally at West Marine,
Sunbrella Premium Color Upgrade: Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:

Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.

You can count on all of the above or we will repair or replace the item in question.
Warranty: This product is covered by the Ameritex® 1 Year Manufacturer Warranty.
Installation:

YouTube® VIDEO: How to install snaps on a Bow Cover,
Bow Cover Installation,
Installing Male Snap Stud Screws in Fiberglass
Maintenance and Care: Canvas Care and Maintenance
Reviews: RNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews
★★★★✬

Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.

Your Boat: Rinker 200 MTX Bowrider (2011-2016)
12-digit HIN: (required)
Your 12-digit Hull-Identification-Number (HIN) (RNKsssssmbyy) is embossed on the starboard side of your transom, below the rub rail, and the HIN should also be on your registration papers (verify it with the official HIN on your transom) and may also be on your insurance documents,
The HIN is required to verify the boat manufacturer (first 3-digits) and determine date of manufacturer (last 4-digits) to determine the correct revision of the Bow Cover (Factory OEM),
Unfortunately, the HIN does NOT tell us what model the boat is, what options the boat has or what color canvas it originally came with, so we must rely on you to select the boat, options and color from our web site.

Material/Colors:
Color Chart: Sunbrella® Marine Fabric Color Chart (some colors are no longer available),
Select Fabric/Color: Per manufacturing agreements with Rinker®, OEM canvas for the 2011-2016 Rinker® 200 MTX Bowrider is ONLY offered in these factory original (OEM) colors and fabric: Black, Sunflower Yellow, Jockey Red or Dubonnet Tweed Sunbrella®,

or Premium Color Upgrade for Logo Red, Jockey Red, Burgundy, Orange, Sunflower Yellow, Concord or Plum Sunbrella® marine fabric.

Please enter Ameritex® BLACK TAG P/N from YOUR Cover : (required)

Please enter Ameritex® BLACK TAG DT date from YOUR Cover : (required)

Price: $822.20 - $ 123.33 DISCOUNT
(Spring Sale)

= SALE PRICE: $698.87 USD
+ Shipping to

Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Rinker Bow-Cover-OEM-T1 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.

COMPUTER Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) 18.119.111.9 US

$822.20
- $123.33 discount
(Spring Sale)
= $698.87 Sale Price

RNR-Marine™ is rated 4.57 / 5.0 based on 147 RNR-Marine™ Customer reviews and 23 Better Business Bureau® reviews

★★★★✬

Scroll down to
select options and purchase...

Page: http://rnr-marine.com/Purchase.php?product=Bow-Cover-OEM-T1&manufacturer=Rinker&model=200+MTX+Bowrider&yearfrom=2011&yearto=2016&partno=1121xxccc

Purchase Bow Cover (Factory OEM) part number [1121xxccc] for 2011-2016 Rinker® 200 MTX Bowrider, No Tower or Radar Arch, I/O Sterndrive

Purchase
Bow Cover (Factory OEM)
part number [1121xxccc]
for 2011-2016 Rinker®
200 MTX Bowrider, No Tower or Radar Arch, I/O Sterndrive