Factory Camper AFT CURTAIN with clear Eisenglass windows zips to back of OEM Camper Top and Side Curtains (not included) and connects to Transom, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2010-2011 digitized patterns approved by Regal® for the 3350 No Arch: 3350,, No Radar Arch or Tower:
Notes:
2010-2011 Regal® 3350 No Arch Model Specific Details: Email for info and pricing Regal® originally offered the 2010-2011 3350 No Arch in Sunbrella® fabric.
Product Details: Aft portion of the Camper-Top canvas which is an enclosure attached to the back of a Forward Bimini, Convertible Top or Arch that has its own frame. When combined with Curtains, the Camper-Top fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. The Aft-Curtain has 25 to 60 standard 3/8" snaps or bungee cords, depending on the boat. Stainless steel Canvas-Snaps are included (If used) but not installed in the canvas. Let us know if you need SS Snap-Stud-Screws to screw into the boat. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes.
Regal® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Great Lakes) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Regal® canvas are size #8 (6 teeth/inch). Most (NOT All) Regal® Ameritex® and Taylor-Made® Bimini Tops have zippered frame (bow) pockets for easy installation. Regal® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Regal® boats over 2 years old. Regal® OEM canvas part number scheme: Ameritex® tags [xxxxxxccc], where the' xxxxxx' identifies the canvas piece and 'ccc' is the color code or Great Lakes tags [yyRExxx xAr-xxxxx-fcc], where 'yy' is the year and 'cc' is the color code. Regal® Hull Identification Number (HIN) = RGMsssssmbyy , where [yy] = model year.
Factory OEM canvas: Ameritex® tags
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White Ameritex® tags (the tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2010,2011} Regal® 3350 No Arch: 3350,, No Radar Arch or Tower.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags ("cc" is the color code).
ONLY zips to Factory OEM Camper Top and Side-Curtains.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool Will be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
For Ameritex® (Not Great Lakes) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Regal® canvas are size #8 (6 teeth/inch). Most (NOT All) Regal® Ameritex® and Taylor-Made® Bimini Tops have zippered frame (bow) pockets for easy installation. Regal® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews