Purchase Camper Aft-Curtain (Factory OEM) part number [1104xxccc - S-GL 289 GS] for 2009-2015 Glastron® GS 289 No Arch GS289 cuddy WithOUT Optional Radar Arch
Camper-Top-Aft-Curtain-OEM-T5 for 2009-2015 GS 289 No Arch
Glastron, GS 289 No Arch, 2012, Bimni Top, Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Port Rear.
Glastron, GS 289 No Arch, 2010, Bimni Top, Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Rear.
Glastron® GS 289 No Arch shown with Camper-Top-Aft-Curtain-OEM-T5 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Camper AFT CURTAIN with clear Eisenglass windows zips to back of OEM Camper Top and Side Curtains (not included) and connects to Transom, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2009-2015 digitized patterns approved by Glastron® for the GS 289 No Arch: GS289 cuddy WithOUT Optional Radar Arch:
Notes:
2009-2015 Glastron® GS 289 No Arch Model Specific Details: Stainless steel frames. Camper Aft Curtain has U-Shaped, zippered windows and optional screen inserts. The canvas snaps to the windshield and fiberglass. A sloped Bimini Aft Curtain OR a 'stand-up' Camper Top, Frame, and Camper Side and Aft Curtains were offered at the rear. The Aft Curtains and Cockpit Cover connect at the transom with Bunjis. Glastron® originally offered the 2009-2015 GS 289 No Arch in Black, Captain Navy and Dubonnet Tweed Sunbrella® fabric.
Product Details: Aft portion of the Camper-Top canvas which is an enclosure attached to the back of a Forward Bimini, Convertible Top or Arch that has its own frame. When combined with Curtains, the Camper-Top fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. The Aft-Curtain has 25 to 60 standard 3/8" snaps or bungee cords, depending on the boat. Stainless steel Canvas-Snaps are included (If used) but not installed in the canvas. Let us know if you need SS Snap-Stud-Screws to screw into the boat. The boat manufacturer and RNR-Marine™ do not recommend operating the boat with the aft-curtain in place, due to dangerous fuel and exhaust fumes.
Glastron® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Glastron® canvas are size #8 (6 teeth/inch). Most (NOT All) Glastron® Bimini Tops have zippered frame (bow) pockets for easy installation. Glastron® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Glastron® began making ther own canvas in-house in 2016, so we do not have anything after 2015. Glastron® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Glastron® Hull Identification Number (HIN) = GLAsssssmbyy (1972-2010) or PGLsssssmbyy (2010-current) , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2009,2010,2011,2012,2013,2014,2015} Glastron® GS 289 No Arch: GS289 cuddy WithOUT Optional Radar Arch.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [1104xxccc - S-GL 289 GS], [1109xxccc - S-GL 289 GS Flaps] and [1111xxccc - S-GL 289 GS Screens] ("ccc" is the color code).
ONLY zips to Factory OEM Camper Top and Side-Curtains.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool Will be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Glastron Camper-Top-Aft-Curtain-OEM-T5 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Glastron® canvas are size #8 (6 teeth/inch). Most (NOT All) Glastron® Bimini Tops have zippered frame (bow) pockets for easy installation. Glastron® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews