Factory Camper Zippered BOOT COVER for OEM Camper Top (not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2002-2005 digitized patterns approved by Glastron® for the GS 249 Ameritex: GS249 cuddy (No Tower or Arch):
Notes:
2002-2005 Glastron® GS 249 Ameritex Model Specific Details: Taylor Made® and Ameritex® both made canvas for this boat, so you MUST verify which canvas you have by the tags (Ameritex® and Taylor Made® canvas is NOT inter- changeable). Aluminum top frames. Customers have confirmed that the 2002 GS249 canvas also fits the 2001 GS249 boat, but we cannot guarantee fit. The Bimini-Top does not have zippers on the pickets for the frame bows to pass through. Glastron® originally offered the 2002-2005 GS 249 Ameritex in Mediterranean Blue Tweed, Mediterranean Blue (solid), Captain Navy or Beige Sunbrella® fabric.
Product Details: Zips tight around Camper canvas when stowed (raised or lowered). Some (very few) Camper-Boots have the boat manufacturer logo (Chaparral or Formula for example) embroidered or silk screened in boat manufacturers specified thread color: typically black, white, silver or tan (gold), depending on the fabric color. Formula® uses Silver thread for their embroidered logo. If we do not have a logo available, the part is sold without the logo. If you are concerned about the logo color, please email and ask.
Glastron® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Glastron® canvas are size #8 (6 teeth/inch). Most (NOT All) Glastron® Bimini Tops have zippered frame (bow) pockets for easy installation. Glastron® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Glastron® began making ther own canvas in-house in 2016, so we do not have anything after 2015. Glastron® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Glastron® Hull Identification Number (HIN) = GLAsssssmbyy (1972-2010) or PGLsssssmbyy (2010-current) , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2002,2003,2004,2005} Glastron® GS 249 Ameritex: GS249 cuddy (No Tower or Arch).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags [1013xxccc - S-GL 249] ("ccc" is the color code).
Only fits Factory OEM Camper Top Frame and Canvas (NOT included).
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Glastron® canvas are size #8 (6 teeth/inch). Most (NOT All) Glastron® Bimini Tops have zippered frame (bow) pockets for easy installation. Glastron® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews