Purchase Camper Top Canvas and Frame (Factory OEM) for 2007-2008 Monterey® 290 Cruiser BLI 290CR Cruiser with factory installed Radar Arch and Boatswains Locker(r) tags
Monterey, 290 Cruiser BLI, 2008, Bimini, Front Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Starboard Rear.
Monterey® 290 Cruiser BLI shown with Camper-Top-Canvas-Frame-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory CAMPER-TOP: CANVAS and FRAME with zippers for OEM Camper Side and Aft Curtains (not included) ((Bimini and other curtains sold separately) Factory Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2007-2008 digitized patterns approved by Monterey® for the 290 Cruiser BLI: 290CR Cruiser with factory installed Radar Arch and Boatswains Locker(r) tags:
Notes:
2007-2008 Monterey® 290 Cruiser BLI Model Specific Details: Both Ameritex® and Boatswains Locker made canvas for the 2007 290 Cruiser, so be sure to check which you have, as they are NOT inter- changeable. We have the OEM canvas for this boat, but it is not in our online database yet. Please Email with Year, Make and Model for information and pricing. Monterey® originally offered the 2007-2008 290 Cruiser BLI in Sunbrella® fabric.
Product Details: Camper-Top-Canvas-Frame is JUST the Camper-Frame and Camper-Top Canvas (NO Curtains) attached to the back of a Bimini, Sunshade, Convertible Top or Arch that has its own frame to cover to the back of the boat. When combined with Camper Side and Aft Curtains, the Camper fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. This kit does NOT include Camper Side or Aft Curtains. Factory Original-Equipment (OEM) canvas made-to-order and shipped from Ameritex® .
Monterey® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Great Lakes or BLI®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Monterey® canvas are size #8 (6 teeth/inch). Monterey® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Monterey® boats over 2 years old. Monterey® OEM canvas part number scheme: tags, where [xxxx] identifies the canvas piece and [ccc] is the color code. Monterey® Hull Identification Number (HIN)= RGFsssssmbyy , where [yy] = model year.
Factory OEM canvas: BLI® tags (NOT Ameritex)
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White BLI® tags (NOT Ameritex) (the tags are approx. 2-3 inches x 4-5 inches),
The BLI® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2007,2008} Monterey® 290 Cruiser BLI: 290CR Cruiser with factory installed Radar Arch and Boatswains Locker(r) tags.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with BLI® tags (NOT Ameritex) ("cc" is the color code).
WE MUST HAVE THE P/N FROM THE STICKER ON YOUR OLD FRAME TO PROCEED.
ONLY fits specified boat and zips to factory OEM Tops or Arch and Curtains.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
For Ameritex® (Not Great Lakes or BLI®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Monterey® canvas are size #8 (6 teeth/inch). Monterey® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews