Purchase Camper Top Canvas, SeaMark® fabric (Factory OEM) for 2008-2008 Monterey® 350 Sport Yacht Boatswains 350SY Sport Yacht with factory installed, forward facing Radar Arch with Bimini Top in front and Boatswains Locker(r) canvas
Sea Ray, 450 Sundancer, 1997, Bimini, Visor, Side Curtains, in Linen Tweed, Starboard Front.
Image (random) of Camper-Top-Canvas-Seamark-OEM-B (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Camper CANVAS (no frame) with zippers for OEM Camper Side and Aft Curtains (not included), SeaMark(r) (or RECwater(r)) vinyl-lined Sunbrella(r) (or RECacril(r)) fabric (Bimini and other curtains sold separately), OEM (Original Equipment Manufacturer) in SeaMark® (waterproof) marine fabric, produced with the same high quality, original 2008-2008 digitized patterns approved by Monterey® for the 350 Sport Yacht Boatswains: 350SY Sport Yacht with factory installed, forward facing Radar Arch with Bimini Top in front and Boatswains Locker(r) canvas:
Notes:
2008-2008 Monterey® 350 Sport Yacht Boatswains Model Specific Details: Please Email for prices Monterey® originally offered the 2008-2008 350 Sport Yacht Boatswains in Black, Captain Navy, Linen Tweed or Burgundy Sunbrella® with SeaMark® (vinyl lined, waterproof Sunbrella) tops OR contact us to quote Pearlescent (white) Aqualon® fabric.
Product Details: The Camper-Top is the single Top canvas piece at the back of the boat (sometimes the front on Bow-Riders or Deck Boats), mounted on a separate Camper-Top-Frame (sold separately) which attaches to the back of a Bimini-Top, Convertible-Top, Arch-Aft-Top, Arch or Hard-Top (other tops sold separately). The Camper-Top combines with Curtains (sold separately) to fully enclose the back of the boat providing full, protected (standup) use of the rear cockpit area at the dock. Factory Original-Equipment (OEM) canvas made-to-order and shipped from BLI®.
Included: Single Camper-Top-Canvas piece with Zippers on edges,
NOT Included: Frame, Curtains, Mtg. Hardware, Boot-Cover and other Bimini/Convertible/Arch-Tops and Frames.
Monterey® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Great Lakes or BLI®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Monterey® canvas are size #8 (6 teeth/inch). Monterey® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Monterey® boats over 2 years old. Monterey® OEM canvas part number scheme: tags, where [xxxx] identifies the canvas piece and [ccc] is the color code. Monterey® Hull Identification Number (HIN)= RGFsssssmbyy , where [yy] = model year.
Size/Fit:
Factory Original-Equipment-Manufacturer (OEM) patterned for the 2008 Monterey® 350 Sport Yacht Boatswains: 350SY Sport Yacht with factory installed, forward facing Radar Arch with Bimini Top in front and Boatswains Locker(r) canvas.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Boatswains Locker® tags ("cc" is the color code).
Has pockets to fit onto Factory OEM Camper-Top-Frame bows (frame NOT included).
Verify that your old and mating canvas has factory #10 zippers (5 teeth/inch), NOT #8 (6 teeth/inch, which are After-Market zippers).
Attaches (typically zips) to the back of a Radar Arch, Bimini-Top, Convertible-Top, Sunshade-Top or Hard-Top (other tops NOT included).
Has zippers along sides and back for Camper Side and Aft Curtains IF offered (NOT included).
ONLY fits Factory Original-Equipment Camper-Top Frame, Sides and Aft Curtains.
Warranty: BLI™ stands behind our products with a one-year workmanship warranty, and will respond in a reasonable amount of time to any concerns or questions customers may have regarding a specific product, application or fabric and repair any such defects (such as sewing) found upon delivery.
Installation: This replacement top canvas does NOT have Zippers at the Frame Bows, so the Frame MUST be removed and taken apart (at one end typically) to replace the top canvas. Canvas and Snap Installation Instructions
Not what you need? Try:
For Ameritex® (Not Great Lakes or BLI®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Monterey® canvas are size #8 (6 teeth/inch). Monterey® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews