Purchase Camper Top Frame (Factory OEM) part number [101xxxccc - S-GL 279] for 2002-2005 Glastron® GS 279 GS279 cuddy WithOUT Optional Radar Arch (or not connecting to Radar Arch)
Glastron, GS 279, 2003, Beige Sunbrella, Bimini Top, Front Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains.
Glastron, GS 279, 2004, Optional Radar Arch, Bimini Top, Front Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains.
Glastron® GS 279 shown with Camper-Top-Frame-OEM-T0.2 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Camper FRAME for OEM Camper-Top Canvas (not included), OEM (Original Equipment Manufacturer) , produced with the same high quality, original 2002-2005 digitized patterns approved by Glastron® for the GS 279: GS279 cuddy WithOUT Optional Radar Arch (or not connecting to Radar Arch):
Notes:
2002-2005 Glastron® GS 279 Model Specific Details: This canvas was used from 2001 through April 2006 for HIN ending in D606 or less Glastron® originally offered the 2002-2005 GS 279 in Black, Captain Navy, Mediterranean Blue, Mediterranean Blue Tweed, Beige or Burgundy Sunbrella® fabric.
Product Details: Camper-Top-Frame only (NO Canvas or Curtains). The Camper-Top-Frame is attached to the back (sometimes the front on Bow-Riders or Deck Boats) of a Bimini, Sunshade, Convertible Top or Arch that has its own frame. When combined with Curtains, the Camper-Top fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. Factory Original-Equipment (OEM) canvas made-to-order and shipped from Ameritex® .
Glastron® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Glastron® canvas are size #8 (6 teeth/inch). Most (NOT All) Glastron® Bimini Tops have zippered frame (bow) pockets for easy installation. Glastron® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Glastron® began making ther own canvas in-house in 2016, so we do not have anything after 2015. Glastron® OEM canvas part number scheme: Ameritex® or Taylor-Made® tags, where [xxx] identifies the canvas piece and [ccc] is the color code. Glastron® Hull Identification Number (HIN) = GLAsssssmbyy (1972-2010) or PGLsssssmbyy (2010-current) , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2002,2003,2004,2005} Glastron® GS 279: GS279 cuddy WithOUT Optional Radar Arch (or not connecting to Radar Arch).
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [101xxxccc - S-GL 279] or [102xxxccc - S-GL 279] ("ccc" is the color code).
WE MUST HAVE THE P/N FROM THE STICKER ON YOUR OLD FRAME TO PROCEED.
Only fits specified boat.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.
Shipping Notes:
Signature required for delivery on orders over $500,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Glastron Camper-Top-Frame-OEM-T0.2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Glastron® canvas are size #8 (6 teeth/inch). Most (NOT All) Glastron® Bimini Tops have zippered frame (bow) pockets for easy installation. Glastron® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews