Purchase Camper Side-Curtains (Factory OEM) for 2007-2008 Monterey® 290 Cruiser BLI 290CR Cruiser with factory installed Radar Arch and Boatswains Locker(r) tags
Camper-Top-Side-Curtains-OEM-T for 2007-2008 290 Cruiser BLI
Monterey, 290 Cruiser BLI, 2008, Bimini, Front Connector, Side Curtains, Camper Top, Camper Side and Aft Curtains, Starboard Rear.
Rinker, 330, 2008, Factory OEM, Connector, Hard Top Connector, Side Curtains, Camper Top, Camper Arch Connection, Camper Side Curtains, Camper Aft Curtain, Port Rear.
Images (random) of Camper-Top-Side-Curtains-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Pair Factory Camper SIDE CURTAINS (Port and Starboard sides) with Eisenglass window(s) zip to OEM Camper Top and Aft Curtains (not included), OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original 2007-2008 digitized patterns approved by Monterey® for the 290 Cruiser BLI: 290CR Cruiser with factory installed Radar Arch and Boatswains Locker(r) tags:
Notes:
2007-2008 Monterey® 290 Cruiser BLI Model Specific Details: Both Ameritex® and Boatswains Locker made canvas for the 2007 290 Cruiser, so be sure to check which you have, as they are NOT inter- changeable. We have the OEM canvas for this boat, but it is not in our online database yet. Please Email with Year, Make and Model for information and pricing. Monterey® originally offered the 2007-2008 290 Cruiser BLI in Sunbrella® fabric.
Product Details: Pair of Camper-Side-Curtains ONLY (NO Bimini-Top, Bimini-Curtains, Camper-Top, Aft-Curtains or Camper-Frame) zip to sides of OEM aft Camper-Top (NOT included) and to Camper-Aft-Curtain (NOT included) at rear of boat (sometimes the front on Bow-Riders or Deck Boats). Snaps (included, but not installed) to boat gunwales at bottom. When combined with Camper-Top (NOT included), Camper-Frame and Camper-Aft-Curtains (NOT included), the combined Camper-Top enclosure fully encloses the back of the boat providing full, protected use of the rear cockpit area at the dock or underway. Factory Original-Equipment (OEM) canvas made-to-order and shipped from Ameritex® .
Monterey® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Great Lakes or BLI®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag. We will require the P/N (112350xxx and Greater) and DT date code fromthe tag (or sticker). WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM Monterey® canvas are size #8 (6 teeth/inch). Monterey® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for Monterey® boats over 2 years old. Monterey® OEM canvas part number scheme: tags, where [xxxx] identifies the canvas piece and [ccc] is the color code. Monterey® Hull Identification Number (HIN)= RGFsssssmbyy , where [yy] = model year.
Factory OEM canvas: BLI® tags (NOT Ameritex)
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White BLI® tags (NOT Ameritex) (the tags are approx. 2-3 inches x 4-5 inches),
The BLI® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2007,2008} Monterey® 290 Cruiser BLI: 290CR Cruiser with factory installed Radar Arch and Boatswains Locker(r) tags.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with BLI® tags (NOT Ameritex) ("cc" is the color code).
ONLY zips to Factory OEM Camper-Top and Aft-Curtain.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Stainless steel Canvas-Snaps are included (IF used) but NOT installed in the canvas (to allow for a perfect fit), so a Snap-Tool may be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.