Purchase Convertible Top Canvas Non Sunbrella (Factory OEM) part number [1120144cc] for 2009-current Smoker Craft® 162 Tracer Dual Console
Smoker Craft, 162 Tracer, 2010, Convertible Top, Convertible Side and Aft Curtains, Grey Top Gun, Starboard Front.
Smoker Craft, 162 Tracer, 2013, Convertible Top, Convertible Side and Aft Curtains, Black Polyester, Starboard Front.
Smoker Craft® 162 Tracer shown with Convertible-Top-Canvas-Non-Sunbrella-OEM-T2 (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory Convertible CANVAS (only) for OEM Convertible Top Frame (not included) which goes to top of the factory windshield, NO Zippers, OEM (Original Equipment Manufacturer) , produced with the same high quality, original 2009-2024 digitized patterns approved by Smoker Craft® for the 162 Tracer Dual Console:
Notes:
2009-current Smoker Craft® 162 Tracer Model Specific Details: The Convertible Top was called a Forward Top by Smoker-Craft®. Smoker Craft® originally offered the 2009-current 162 Tracer in Offered ONLY in Grey(58) Top-Gun® 11-1/2 oz/sq-yd. Acrylic Coated Polyester or Black Polyester fabric fabric.
Product Details:See Boats Model-Specific Notes for Fabric and Color choice. Replacement Canvas only for Convertible-Top (where the canvas top connects directly to top of the windshield). NO Frame, Boot or Curtains. Only has Zippers If offered with Side or Aft Curtains.
Smoker Craft® Factory Original Equipment Manufacturer (OEM) Notes:For Ameritex® (Not Dowco®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM SmokerCraft® canvas are size #8 (6 teeth/inch). SmokerCraft® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). We can only sell canvas and covers direct for SmokerCraft® boats over 2 years old. SmokerCraft® OEM canvas part numbers: Ameritex® tags p/n[nnnxxxccc], where [nnn] identifies the boat (an internal code), [xxx] identifies the canvas piece and [ccc] is color code. SmokerCraft® Hull Identification Number (HIN) = RSBpssssmbyy (1972-current), SMKpssssmbyy (1972-current) or SUNpssssmbyy (1988-current) , where [yy] = model year.
Factory Original-Equipment-Manufacturer (OEM) patterned for the {2009,2010,2011,2012,2013,2014,2015,2016,2017,2018,2019,2020,2021,2022,2023,2024} Smoker Craft® 162 Tracer Dual Console.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags p/n [1120144cc] ("cc" is the color code).
Only fits the Factory OEM Convertible Top Frame.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Lead-Time (Estimated): 3-4.5 week Lead-Time est. after order finalization as of 4/25/24.
Shipping Notes:
Signature required for delivery,
Can NOT ship to Post Office (PO) Box,
Can NOT change your address after order is placed,
Buyer is responsible for all Taxes, Duties and Tariffs imposed by local governments,
Use a US48 Based (in Florida, New Jersey or Oregon for example) Freight Forwarder to ship outside the USA or Canadian Provinces,
Check shipment for damage upon receipt and file claim with shipper.
International Shipments:
We do NOT ship Smoker Craft Convertible-Top-Canvas-Non-Sunbrella-OEM-T2 Outside North America (continental United States 48 States (US48) and Canadian Provinces), Overseas: Use a US-based Freight Forwarder,
Please contact a Freight Forwarder (instructions) with an address in the US48 (Florida preferred for timeliness) to ship this for you,
Also note that the Freight Forwarders address must be added to your Credit Card to complete payment.
Not what you need? Try:
For Ameritex® (Not Dowco®) canvas, covers & frames: A laser-engraved, black rubber tag is sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), and the only way we are able to manufacture the exact canvas, cover or frame specific to your boat is if you provide the part number (P/N) on that tag: We will require the P/N (112350xxx and Greater) and DT date code from this Black Tag (or sticker) and WE WILL MAKE THIS EXACT PART NUMBER, so there are NO RETURNS, REFUNDS or EXCHANGES. Zippers on OEM SmokerCraft® canvas are size #8 (6 teeth/inch). SmokerCraft® installed the snaps in their boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see 
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews