Purchase Hard Top Connection Front, Aqualon™ fabric (Factory OEM) for 2015-current Formula® 400 SS Hard Top F-400 Super Sport with factory installed Hard-Top
Rinker, 360 Hard Top, 2006, Factory OEM, Front Connector, Side Curtains, Front HT Connection, Aft HT Connection, Camper Side Curtains, Camper Aft Curtain, Port Front.
Arch Connection, Keder Welt, Zipper Strip.
Images (random) of Hard-Top-Connection-Front-Aqualon-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory CONNECTION (Zipper Strip for Track) connects OEM Front Connector (windshield, not included) to Track on front of the factory Hard-Top, White Mustang(r) (was Aqualon(tm), which is no longer available) fabric, OEM (Original Equipment Manufacturer) in Aqualon™ fabric, produced with the same high quality, original 2015-current digitized patterns approved by Formula® for the 400 SS Hard Top: F-400 Super Sport with factory installed Hard-Top:
Notes:
2015-current Formula® 400 SS Hard Top Model Specific Details: Please email for pricing. Formula® originally offered the 2015-current 400 SS Hard Top in Black, Captain Navy, Marine Blue, Cadet Grey, Linen, Burgundy or Toast Sunbrella® with Pearlescent (white) Aqualon® Arch Connection Strips, or contact us for all White fabric.
Product Details: Canvas strip with Keder-Welt that slide into track on front of Hard-Top and zips to Eisenglass Front Windshield Connector.
Formula® Factory Original Equipment Manufacturer (OEM) Notes:A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size:
#8 (6 teeth/inch) used up to early 2005 and from 2009 forward,
#10 (5 teeth/inch) used on most (not all) boats from the end of 2005 through the 2008 model year
(it is necessary to check your zipper size when ordering 2005-1008 canvas: simply measure the number of teeth over 2 inches and divide by 2 for accuracy)
. Boot Covers MAY have the Formula® logo embroidered in Silver, Gold, Black or White (Formula specified depending on fabric color). All Formula® frame bows and hardware are Type 316L Stainless Steel. All Formula® Tops are sewn with Gore(®) Tenara(®) Thread to avoid rotting. Most (NOT All) Formula® Tops have zippered frame (bow) pockets for easy installation. Formula® installed the snaps in the boats, canvas and covers at their factory, so we cannot install the canvas snaps for you because we do not have locations (see Canvas/Snap Installation to learn about installing snaps). Formula® made their factory OEM Bow, Cockpit and Mooring Covers in-house themselves, so we do NOT have them. We can only sell canvas and covers direct for Formula® boats over 2 years old. OEM canvas part number scheme: [xxxxx] identifies the canvas piece and [ccc] is the color code. Formula® Hull Identication Number (HIN) scheme is TNRsssssmbyy, where [yy] is the model year.
Factory OEM canvas: Ameritex® tags
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White Ameritex® tags (the tags are approx. 2-3 inches x 4-5 inches),
The Ameritex® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Factory Original-Equipment-Manufacturer (OEM) patterned for the 2015-current Formula® 400 SS Hard Top: F-400 Super Sport with factory installed Hard-Top.
Will ONLY fit and/or zip to other Factory OEM canvas/frames with Ameritex® tags ("cc" is the color code).
Fits Factory Original-Equipment (OEM) Hard-Top and OEM Front Windshield Connector perfectly.
Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases).
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.
Not what you need? Try:
RNR-Marine™ is rated 4.57 / 5.0
based on 147
RNR-Marine™ Customer reviews
and 23
Better Business Bureau® reviews
A laser-engraved, Black Rubber Tag and a White Canvas Tag are sewn into every Ameritex® (we no longer make Taylor-Made®) original-equipment canvas or cover (a laser printed sticker is on each frame), so we need the P/N (Part Number) and DT date code from the Black Tag (or sticker), or the legible Part Numbers from the White Tag if you have them OR we can lookup 2010+ Formula® P/Ns in our system (just enter P/N 123456789 if you don't have any Part Numbers and make up a DT code between 2011 and 2019). Formula® Canvas Zipper Size: 
