Purchase Hard Top Connector Curtains Connections SET (Factory OEM)
Boston Whaler, Conquest 305, 2005, Hard Top, Front Conector, Side Curtains Aft Drop Curtains, Front.
Boston Whaler, Conquest 305, 2005, Hard Top, Front Connector, Side Curtains, Aft Drop Curtain, Starboard Rear.
Images (random) of Hard-Top-Connector-Curtains-Connections-SET-OEM-T (additional canvas pieces or covers may also be shown above, click images to enlarge)
Factory 5-7 item (7-11 pieces) 4-sided enclosure replacement canvas set: Front window Connector panel(s), Side Curtains (pair each) and Aft Curtain with Connections (zipper strips) for factory installed Hard-Top, OEM (Original Equipment Manufacturer) in Sunbrella® marine fabric, produced with the same high quality, original - digitized patterns approved by ® for the :
Notes: Full set of flexible glass enclosure Curtains and Connections fit between factory Hard-Top and Windshield or Console and floor:
Front Connector (also called "Windshield", "Spray-Shield" or "Visor") and Connecton (zipper strip slides into Track on Hard-Top, if used), Not MAY or MAY NOT have zippered window(s), check Model-Specific details,
Pair of Side-Curtains and Connections (zipper strips for Track on Hard-Top, if used),
Aft Curtain and Connection (zipper strip for Track on Hard-Top, if used).
The Connections are narrow zipper strips which zip to the top of the Front Conenctor, Side and Aft Curtains and have Keder Welt along the top to slide into the Plastic or Aluminum Tracks on the factory installed Hard-Top frame with and SS Snap-Stud-Screws, Clip-On-Windshield-Frame-Snaps or slides into a track at the top of the windshield.
TIP: Be sure to check your existing (and adjacent connecting) canvas pieces (and frames) for:
White (the tags are approx. 2-3 inches x 4-5 inches),
The ® logo embossed on the heads of the stainless canvas snaps,
The Zipper Size listed above (#8 in most cases) on all zippers.
Size/Fit: Fits Factory installed Original-Equipment (OEM) Hard-Top perfectly. Verify that your old and mating canvas has AMERITEX® or TAYLOR-MADE® on the tags and embossed on the Canvas Snaps AND the correct factory OEM Zipper Size (#8 = 6 teeth/inch in most cases). Will not fit after-market top or canvas. Mounts to front of Hard-Top via Hard-Top-Connection (Zipper Strip) with Keder Welt which slides into Plastic or Aluminum Tracks. Attaches to windshield with Clip-On-Windshield-Frame-Snaps, Stainless steel Snap-Stud-Screws or Keder Welt that slides into a track on the top of the windshield. Side and Aft Curtains snap at bottom. Stainless steel Canvas-Snaps are included (IF used) but not installed in the canvas (to allow for a perfect fit), so a Snap-Tool may be required.
Guarantee: We guarantee our factory original (OEM) canvas, frames and covers:
Will be of first rate quality and free of manufacturing defects,
Will be made with the exact patterns and specifications as originally designed and delivered with the boat when new,
Will fit the specified boat, as long as the existing and mating canvas and frames are factory original: having part numbers, snaps and zipper size as specified in the Size/Fit and Model-Specific-Information on this page,
Will perform as described when installed properly.
You can count on all of the above or we will repair or replace the item in question.